[WRE UPDATE | BUSINESS]
safety errors and potential damage to the crane, or by using two separate cranes, but only if those cranes could be moved close enough together to make the load turn possible. Both were make-do solutions that were far from efficient. In the case of the single crane method, it required multiple workers to guide the housing into position and could cause damage to the crane if the fleet angle, the angle of the rope coming off the hoist, exceeded more than 4 degrees. In the case of two cranes working together, it also required at least two crane operators, not to mention at least two spotters (one for each crane) to ensure the load was in proper position at each moment. In either scenario, the cranes were not built to handle the stresses of load turning. With a new manufacturing facility planned that would be dedicated to the assembly of heavy industrial blowers and fans, New York Blower approached Hoosier Crane Service Company, its long-time crane service and installation partner, for help. “We’ve worked with New York Blower to install and service chain hoists for its La Porte, Indiana, facility, but New Castle was a different kind of project,” said Hoosier Crane COO Todd Cook. “Tey were going to need to constantly move, flip and rotate the fan housings to do the welds, and we quickly realized that specialized, load-turning cranes were the answer.” Load-turning cranes are designed for situations where heavy loads need to be rotated and flipped. Each crane incorporates two hoists to distribute the weight and make flipping the load possible. Te operator attaches two hooks to the load, one on each side, which are in turn suspended by the separate hoists, call them hoist A and hoist B. To flip the load, hoist B lowers its hook until the load is completely suspended by hoist A. Te load is then rotated 180 degrees around its vertical axis, reattached to hoist B, and lifted into the desired position. Although many people do it, Cook said using standard hoists
A fan housing suspended by the load-turning crane.
Blower’s largest fans and components, some with diameters of 16 feet and weighing nearly 40 tons. Once completed, the new plant would allow the company
to serve heavy industrial customers, a new market for New York Blower that could add as much as 30 percent to the company’s topline revenue, said Jason McShane, New York Blower’s facilities manager. Building fans the size of elephants requires specialized methods, McShane said. For example, a centrifugal industrial fan that moves thousands of cubic feet of air per minute is so large that it must be moved by a crane. As it’s moved, it also needs to be manipulated in three dimensions so that all sides of the fan housing can be accessed and welded – not an easy task when the fan’s housing assembly alone can weigh more than 20 tons. Prior to building its New Castle facility, McShane said New
York Blower would flip and turn smaller fan housings either by using a single crane with one hoist, which left room for
that are not designed for load turning is extremely dangerous because of side pulling and dynamic shocks that occur when the load suddenly turns. “We’ve seen frames bend and wire rope assemblies break” Cook said. “People try to get the job done and they don’t realize that it’s almost impossible to turn loads safely. Trying to do that with a standard crane you’re likely to damage either the equipment or the load.”
When it became clear that a load-turning crane was what
New York Blower needed, Cook said Hoosier Crane turned to R&M Materials Handling. “R&M is a go-to solution for us,” Cook said. “Tey’ve done
an excellent job of leading the industry … we can make things happen in a much cleaner procurement aspect, and the quality of R&M hoists has been phenomenal.” R&M hoist and crane packages are shipped in a kit that
includes every component, part, hardware piece and wiring harness needed, Cook said, which makes onsite assembly and installation fast and efficient. A longtime supplier to Hoosier Crane, R&M worked with
Cook’s team to design a solution especially for New York Blower. Hoosier Crane produced four cranes with the R&M load-
76
MARCH–APRIL 2019
WIRE ROPE EXCHANGE
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
