WRE CATALOG GUIDE] 27 WHAT’S NEW 29 WRE CATALOG


29 WIRE ROPE 38 MILLIMETER WIRE ROPE


38 BLOCKS 40 CHAINS 42 CLAMPS 44 CLIPS 44 EQUIPMENT 47 EYE NUTS


WHAT’S NEW PEERLESS INDUSTRIAL GROUP, INC. INTRODUCES MODEL ATSB ADJUSTABLE TELESCOPIC SPREADER BEAM


Peerless Industrial Group, Inc. introduces their ATSB, Adjustable Telescopic Spreader Beam ideal for outdoor construction applications and for areas where headroom is not limited. It is ideal for accommodating various size loads and utilizes an upper rigging spread between two lift points that adds extra stability to the lift. It is supplied with a pair of heavy-duty swivel hooks. Additional lift points and hardware are available as options. Peerless’ ATSB Adjustable Telescopic Spreader Beam is available from 2 through 40 Ton capacities with


outside spreads that adjust from a minimum of 4 to 6 feet to a maximum of 12 to 20 feet. Additional sizes and capacities are available. The ATSB is engineered and manufactured to ASME B30.20 & BTH-1 Design Category B Service Class 2 and has a specified fatigue life of 100,001 to 500,000 load cycles. All ATSB, Adjustable Telescopic Spreader Beams are Proof-Tested to 125% capacity. For more information about the Model ATSB Adjustable Telescopic Spreader Beam visit our website at www.peerlesschain.com/products/ATSB/. Peerless Industrial Group, Inc. has been innovating successful products for over 100 years. Today, as a


worldwide provider of lifting solutions, utilizing our exceptional design, engineering, manufacturing, and quality teams, Peerless continues to develop crucial products for the wide variety of markets they serve. Peerless is part of KITO Corporation’s global network providing our customers access to overhead lifting, below-the-hook and material handling, cargo control, hardware, marine and traction products. For more information about Peerless Industrial Group, Inc. visit us online at www.peerlesschain.com y


47 EYEBOLTS 47 HOISTS 48 HOOKS 51 LINKS 51 MASTER LINK 52 MISCELLANEOUS 55 ROPE 55 SHACKLES 58 SHEAVES


58 SLEEVES 59 SLINGS 62 SOCKETS 62 SWIVELS 63 THIMBLES 64 TURNBUCKLES 65 WEBBING 65 WINCHES


WHAT’S NEW CM LABS ANNOUNCES PRODUCT LAUNCHES FOR RELEASE AT BAUMA 2019


CM Labs Simulations, developer of Vortex training simulators, today announced that it will be releasing a host of new training technologies at Bauma 2019. Each element is designed to work independently, or as part of a total team learning solution. CM Labs will be launching its new Augmented Reality (AR) application, which


makes it possible for instructors to bring a virtual mobile crane right into the classroom, where trainees can interact with it, conduct walkarounds, and learn the fundamentals of machine inspection. Once trainees are familiar with the equipment, they can get behind the controls of an


equipment simulator and work through the built-in training curriculum, or focus on the development of specific operator skills. Two training simulators will be on display at CM Labs’ booth: the immersive Vortex Ad-


vantage and the desktop Vortex Edge Plus. Both simulators can run CM Labs’ full catalogue of lifting and earthmoving training packs, including Mobile Crane, Flat-top Tower Crane, Luffing Tower Crane, Crawler Crane, Excavator, Wheel Loader, Backhoe, Dozer, Motor Grader, and more.


These simulators are designed to run independently, or as part of a unique tandem lift


operation that will be on display for the first time at Bauma 2019, allowing two trainees to work simultaneously and cooperatively to complete a crawler crane lifting exercise. In addition, CM Labs will be displaying its Signalperson Training Station, which allows a


third team member to provide hand signals to the operators, while a fourth team member can supervise the operation, or inject challenges using the Instructor Operating Station. “The impact of today’s training simulators goes far beyond equipment and controls


familiarisation,” says Drew Carruthers, CM Labs’ Director of Training Solutions. “With full team training, each member of the team is fully engaged in developing skills and best practice techniques, while also acquiring the collaboration skills that are vital to safety and efficiency on the work site.” Winner of recent awards for product innovation (Heavy Equipment Guide magazine) as


well as top new product (Construction Equipment magazine), CM Labs will display the full team training experience at booth C2.127 in the Canadian Pavilion. y


WIRE ROPE EXCHANGE JANUARY–FEBRUARY 2019 27


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77