BARRELLING MEDIA Brightening Fluid (Politol V)
• Use as a polishing agent in your barrelling machine
• Alternative to your usual barrelling powders
• Can also be used in magnetic
• 1 Litre Cerium Oxide - Polishing Compound Code P48544 Description Politol V Brightening Fluid 1LT Price breaks available, see website Cutting & Burnishing Compounds
UOM Price £11.95
optical and the glass industry. In the glass industry, it agent for precision optical polishing. Removes scratches, water marks and scuffs, lime scale, acid rain marks and much, much more . . .
• Can be used with ceramics and to polish glass and stones
obsidian, etc.
• Average particle size is 1.8 microns • Add water to the 100 grams of powder until a thin paste is formed
Very easy to use: make into a paste or slurry with water. Apply using a soft cloth or sponge, rub vigorously across the scratch until it is gone. Wipe clean and buff
• By mop - Using an rotary soft mop (preferably leather P1302M/M31481) which is attached to a polishing motor or pendant drill, smear on the paste; keep the speed slow and polish very slowly until the desired effect is obtained
• By barrelling unit - To use with your tumbling machine (code B35408/B35410), add 100 grams of powder to water until it forms a paste. Add this to a lapidary drum (B35410) for best results.
Tips to remember: • Avoid overheating the glass • Please note: if you can feel the scratch with your cerium powder
Burnishing Compound (Galley 8 or Barrel Brite): • Galley 8, also known as Barrel Brite • A special formulated burnishing compound • Offers a great consistency with outstanding results assured
shapes and materials
• Safe to use with neoprene rubber acrylic and polyurethane drums
• Has a rust inhibitor for carbon shot, to prevent rusting • Use 50g of powder to 1ltr of water for the ideal mixture
• Produces minimal levels of foam, compared to alternative compounds
• Ammonia based which offers the most potent cleaning and burnishing strength
• Wear chemical resistant gloves (G9907) and safety goggles (G6257) whilst using this solution
• Can be used with PB Cutting powder (C4904) to reduce the rate of grinding
• 1 kg
PB Cutting Compound (C4904): • Use with ceramic Barrelling Cones ( B4903) to de-burr and grind metals.
Unit
paper
work out to your customers one piece at a time
• You can put your work straight into metal barrelling shot for polishing after you have done this process
• 1kg
Varying results can be achieved by using different combinations of shot shapes & material combined with varying concentrations of barrelling compounds
Code
C4365 C4904
Description
Burnishing Compound Galley 8 (Barrel Brite)
Cutting Compound “PB” UOM Price
1KG 1KG
Price breaks available, see website
£10.95 £10.25
Cutting Cones - Matt Finish - Pre-Polishing
paper
work out to your customers one piece at a time
• You can put your work straight into metal barrelling shot for polishing after you have done this process
• Green Cones • Ø12mm • 1kg
For best results grinding Gold and Silver used with a mixture of 5 grams “Galley 8” Barrelling Composition (C4365) and 5 grams “PB” Cutting Compound (C4904).
For heavier grinding add a higher proportion of “PB” to increase the amount of metal removal.
Varying results can be achieved by using different
www.COUSINS .COM 1157 Weight: 100g
Varying results can be achieved by using different combinations of shot shapes & material combined with varying concentrations of barrelling compounds
Code P35555 Description UOM Price
Cerium Oxide Polishing Compound 100G Price breaks available, see website
Cutting Cones (Pre-Polish) £4.65
Stainless Steel Shot - Economy Mix
We all must agree barrel burnishing gets a fantastic
• An economy version mixed stainless steel shot
• Ball, cone, dish & dowel shapes all included
going rusty unlike normal carbon shot
• Use our Cousinsuk barrelling powder (C4365), 50 grams to one 1ltr of water and you will get a high this process.
• 1kg
Varying results can be achieved by using different combinations of shot shapes & material combined with varying concentrations of barrelling compounds
Code S38756 Description
Shot, Stainless Steel (Economy Mix) 1KG Price breaks available, see website
UOM Price £15.95
Carbon Steel Shot - Standard Mix Carbon Steel Shot “The Standard Mix”
in your barrel drum, e.g. 3 litre drum = 3Kg of shot & 3 litres of water
• Barrel burnish your work to a high standard of mirror
• Uniformly sized, mirror-bright and carefully tempered to ensure long life
• Carbon shot must used with Galley 8 Barrelling Composition (C4365) so the shot has long-lasting life
• Every time leave your shot when you are not using it in a fresh new barrelling solution and it will not go rusty
• Contains special sized balls, cones, pin dowels to make up this standard mixture
• Always run new shot for 2 hours with double the amount of burnishing compound to remove protective oil
• 1 kg
Varying results can be achieved by using different combinations of shot shapes & material combined with varying concentrations of barrelling compounds
Code B4902 Description Shot, Carbon Steel (Mixed)
UOM Price 1KG
Price breaks available, see website £19.75
combinations of shot shapes & material combined with varying concentrations of barrelling compounds
Code B4903 Description Cutting Cones, Green
UOM Price 1KG
Price breaks available, see website £15.50
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59
