Bowthruster housing coated with 1030 Blue Coating for protection against erosion and cavitation
to metal surfaces (Steel 4.5 N/
sq.mm. 652 psi) and a quick curing repair that can be massaged into place by hand, excellent for the sealing and filling of leaks or cracks.
The versatile 1010 Cream Repair, Hardness Shore D 75 DIN 53505, Tensile strength 14.3 N/
sq.mm. [2,073 psi] has strong adhesion to metals, for example Steel adhesion 14.40 N/
sq.mm. [2,088 psi], and is an excellent non-porous erosion/ corrosion resistant repair solution for worn, corroded, or cracked; tanks, pump housings, shafts, flange faces, roller bearing seats, hydraulic rams and many more examples. Excellent for rebuilding threaded metalwork with Modulus of Elasticity 1,689 N/
sq.mm. (24,490 psi).
Cream Repair is machinable and heat resistant to 250ºC, as are the standard protective products
Wencon 1020/1030 White and Blue Coatings with Hardness Shore D 80, Tensile Strength 12.9 N/
sq.mm (1,870 psi) and Compressive strength 2,199N/
sq.mm. (318,855 psi). These two- component, double-coat, solvent- free coatings protect against erosion/corrosion, cavitation and bi-metallic corrosion on surfaces in oil, water and salt water tanks, pump housings, salt-water filter housings, valves and cooler-end covers as a few examples. They are practical and cost effective due to the excellent coverage rate of 1kg per sq.m. at 600 microns.
The Wencon 1016 Ceramic Cream Repair with Shore D Hardness : 80 (DIN 53505), is an excellent solvent-free rebuild paste, with Abrasion Resistance (Taber wear test) 25.6 (ISO 7784-1) that allows protection when used
as a repair/rebuild solution, with a very strong bond, for example to steel of 30.80 N/
sq.mm. (4,466 psi), it is therefore extremely effective when rebuilding extensively damaged areas that need non- conductive protection, resistant to 300ºC, from bi-metallic corrosion, abrasion, erosion/corrosion and cavitation due to a very hard, smooth, non-porous finish, with Compressive strength 2,799 N/
sq.mm. (405,855 psi).
The versatile 1017/1018 Ceramic Coatings with Hardness Shore D 81, Tensile Strength 25.4 N/
sq.mm (3,683 psi), are available in Brown and Green and offer a protective coating Temperature resistant to 320ºC. Ceramic Coatings have a very strong bond [Adhesion to steel is 28.90 N/
sq.mm. (4,190 psi)] and is very tough, Compressive Strength 3,030 N/
sq.mm. (439,350
A leaking failed weld on a Stainless Steel fuel tank is repaired with 1010 Cream Repair. The entire lower weld is coated with 1020 White Coating for pre-repair peace-of-mind protection
44 | The Report • September 2017 • Issue 81
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
