FEATURE SPONSOR
WHY SYNTHETIC OIL? XXXX
low as -30°C and can be applied by means of a central lubricating systems. Another benefit of Klübersynth AG 14-61 is its good adhesion and light colour. “The black lubricants used so far for yaw and pitch bearings often contain graphite, thus causing contamination inside and outside the wind turbine… used lubricating grease leaking from the tower and the blades pollutes the environment…and is a safety hazard for staff operating the plant”, explained Dr. Victor Camargos, Head of Business Unit Wind Energy at Klüber Lubrication. Klüber Summit Varnasolv HV is a high viscosity synthetic cleaning concentrate, which matches the gear oil to deliver the efficient cleaning of enclosed gearboxes. The used oil is subsequently drained to flush out any unwanted residues, and fresh, clean oil can be applied – for example the synthetic gear oil Klübersynth GEM 4-320 N, which has proven highly
effective in numerous wind power plants worldwide. With its high scuffing and micro-pitting strength, its high degree of wear protection, as well as its resistance to ageing and oxidation, The product is particularly suited to the specific requirements of the wind power sector.
BELLOW CARTRIDGES FOR AIR-FREE GREASE REFILL IN WIND TURBINES
In the wind market there is an increasing need for efficient refilling solutions of permanently installed automatic lubrication systems. All newer turbines are equipped with these systems and many older turbines are being retrofitted with them, however regardless of turbine age and the size of the grease reservoir, all systems will need to be refilled during scheduled maintenance intervals, typically every six months.
In order to avoid any malfunctions of the automatic lubrication systems during refilling it is important that no air gets into the system, which is why Klüber Lubrication have created and launched an improved bellow cartridge. The new air free bellow cartridge meets the increasing demand for efficient refilling solutions, is compatible with existing service re- lubrication pump units and is available in 3kg and 5kg sizes for use with Klüberplex BEM greases.
Klüber Lubrication
SCAN/CLICK
MORE INFO
www.windenergynetwork.co.uk
35
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82