Air Bag System: 8B-123
• For passenger air bag (inflator) module [B]
Check that passenger air bag (inflator) module is
[A]
firmly and properly secured on deployment fixture
(special tool), and connect adapter cable (B) to
(A)
passenger air bag (inflator) module.
• For side-air bag (inflator) module [C]
Verify that side-air bag (inflator) module is firmly
10 m (33 ft)
(B)
and properly on deployment fixture (special tool),
and connect adapter cable (B) to side-air bag
1
(inflator) module.
• For side curtain-air bag (inflator) module [D]
[B]
a. Connect adapter cable (B) to side curtain-air
bag (inflator) module.
(A)
b. Pile 2 tires (2) and wheel-installed tire (3) on
top of tire with side curtain-air bag (inflator)
(B)
(4), and tie them with wire harness (5) as 10 m (33 ft)
shown.
1
Wire harness specifications
Stripped wire harness section 1.25 mm
2
(0.0019 in.
2
) or more (Stripped wire harness
[C]
diameter 1.25 mm (0.05 in.) or more)
(A)
NOTE:
Wind wire harness (5) around at least 2 times.
• For seat belt pretensioner [E]
10 m (33 ft)
a. Connect adapter cable (B) to seat belt
1
pretensioner.
5
b. Pile 2 wheel-installed tires (3) on top of tire
[D]
with seat belt pretensioner (6), and tie them
with wire harness (5) as shown.
3
Wire harness specifications
Stripped wire harness section 1.25 mm
2
2
(0.0019 in.
2
) or more (Stripped wire harness
4
diameter 1.25 mm (0.05 in.) or more)
(B)
NOTE:
(A)
Wind wire harness (5) around at least 2 times.