8B-108 Air Bag System:
Tightening torque
Driver air bag (inflator) module mounting bolt
3
a)
(a): 9 N·m (0.9 kg-m, 6.5 lb-ft)
1
b)
2
I4RS0A820057-
I5RH01820103-
WARNING:
6) Enable air bag system. Refer to “Enabling Air Bag
Special care is necessary when handling and
System: ”.
storing a live (undeployed) air bag (inflator)
7) Connect negative cable at battery.
module. Observe “Precautions on Handling
and Storage of Air Bag System Components: Driver Air Bag (Inflator) Module Inspection
”. Otherwise, personal injury may result.
S4RS0A8206006
WARNING:
Installation
Never disassemble air bag (inflator) module
1) Connect horn connector (1) securely. or measure its resistance. Otherwise,
2) Connect driver air bag (inflator) module connector
personal injury may result.
(2) to driver air bag (inflator) module (3) securely as
shown in figure. CAUTION:
a) Connect connector.
If air bag (inflator) module was dropped from
b) Lock connector with lock button. a height of 90 cm (3 ft) or more, it should be
replaced.