Advertorial Pet Food manufacturers reduce temperatures by 20ºC
coCooling were contacted by Butchers Petcare, the premium Petfood manufactures, to help with an overheating problem. Temperatures of over 40ºC were being recorded in their main manufacturing plant causing problems for both the work force and the product. An existing fresh air system with extraction was already being used along with fume scrubbing technology to eliminate food odours but these did little to cool the area on hot summers days.
E
To reduce the temperatures 6 EcoCooling evaporative cooling units were installed to provide fresh cool air into the main areas where people were working. The roof mounted EcoCoolers duct cooled air down a distance of 20m through the open ceiling void above the main production area, to provide cooled air exactly where it is needed. The hot air is then extracted out of the building, through the extraction system at the top of the building. The internal environment is monitored continuously by the EcoCooling Control system which automatically alters the fan speed of the coolers to provide compliant conditions within the building. The supply air temperature in the UK will never go above 22ºC even on the very hottest days. The control systems link into the existing BMS system.
The system is simple, safe and low maintenance, has no refrigerants and requires only 70 amps of power and a mains water supply. Butchers are thrilled with their system which now provides them with a far better environment to work in and has eliminated the high temperatures previously seen. EcoCooling now have over 1500 installations in the UK with clients including Premier Foods, Cummins Diesel, Borg Warner and Clarks.
For more information or a quotation please contact
sales@ecocooling.org
Or visit our web site at
www.ecocooling.org tel 01284 810586
SHOWCASE enter 824
Easy to use Buyers Guide for sourcing new suppliers ADHESIVES
• Instant adhesives A range of liquid and gel products including formulations for ‘difficult’ substrates.
• Anaerobic adhesives Liquid and stick adhesives for threadlocking,
threadsealing, gasketing & retaining cylindrical components.
• Epoxy technology
High strength solutions that fill large gaps.
• Light curing adhesives Rapid curing formulations that can be incorporated into production lines.
• Polyurethanes and Modified Silanes Exceptional toughness, flexibility, excellent gap filling & high chemical resistance.
• Dispensing systems Standard and bespoke equipment for speedy and accurate application.
• Loctite 55
The unique sealing cord for secure joints in pipework.
Henkel Ltd.
Technologies House, Wood Lane End, Hemel Hempstead, Hertfordshire HP2 4RQ
Tel: 01442 278000 Fax: 01442 278071
technicalservice.loctite@uk.henkel.com Web:
www.loctite.co.uk
50 years for Demag KBK crane construction kit
FACTORY FOCUS: DUST & FUME EXTRACTION 32
J G Coates (Burnley) Ltd. Trafalgar Street, Burnley, Lancashire BB11 1TH
Tel: 01282 424376 Fax: 01282 456166 Email:
sales@cotel.co.uk Web:
www.cotel.co.uk
For more information please go to
www.connectingindustry.com/suppliers ADJUSTABLE FEET
BOILERS COMPRESSED AIR
DUST AND FUME EXTRACTION
• Efficient steam boilers to reduce boiler energy costs
• Fully packaged boiler houses
• Heat recovery boiler design
• Buy, Lease or Hire
Tel: 01535 665225
www.byworth.co.uk
JULY/AUGUST 2013 FACILITIES MANAGEMENT
Keeping factory floors clean
SOLUTIONS FOR INDUSTRIAL EFFICIENCY HEALTH & SAFETY
A guide to gas detection
TO ADVERTISE IN THIS SECTION PLEASE CALL RYAN ON
01622 699182 JULY/AUGUST 2013 Factory Equipment
John Guest – the Push-Fit system for compressed air
The John Guest range of push-in fittings and pipe provides the ideal connection from compressor receiver to air line service components through to complete ring main and take off points.
Simply pushing the pipe into a fitting makes a connection, removing the need to thread pipe or use solvents to make a connection. The John Guest System gives a quick and easy installation every time.
John Guest Ltd Horton Road, West Drayton, Middlesex UB7 8JL
Tel: 01895 449233 Fax: 01895 425319 Web:
www.johnguest.com
HIGH VAC SPECIALISTS
Manufacturers and suppliers of mobile and fixed installation on-tool dust extraction equipment and vacuum systems for the manufacturing and construction industries for over 30 years. Dustcontrol specialise in high pressure/ low volume systems for high efficiency.
We can solve your dust extraction needs, big to small; hazardous to ATEX/ESD; improving productivity, quality and creating a cleaner working environment.
For UK enquiries please Email:
sales@dustcontrol.co.uk or tel 01327 858001 For more information please see our web site:
www.dustcontrol.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44