ATS Range

AutomaticTransferSwitches

16A Rated Automatic Transfer Switch

The Olson Electronics Automatic Transfer Switches have two mains electrical

supplies that provide back-up redundant power to connected equipment. • Power is normally supplied from the Primary supply ‘A’.

• If that primary supply fails, it will automatically switch to the secondary supply ‘B’. • Once the primary supply ‘A’ is available again, it will automatically switch back. • PLEASE NOTE that the primary and secondary mains supplies must both be connected to the same phase.

The 16A rated unit combines an Automatic Transfer Switch and PDU in one unit. Standard Speci cation for the 16A rated units includes:

•19” 1U high enclosure with a robust steel construction and black paint fi nish •Two C20 16A inlets for the ‘A’ and ‘B’ supply with power available indicators •10 IEC 60320 C13 10A sockets outlets •High integrity dual earth, external M5 earth stud fi tted with a 250mm earth lead •Switching time <15mS •Approved to EN 60950-1:2006 •Designed and manufactured in the UK

ATS/16/PM

PART NO.

ATS/16

13

10 x C13

No. OF

SOCKETS HEIGHT

1U

10 x C13 1U

2x C20

POWER

INLET

2x C20

SALES HOTLINE

METER

No Meter

Deluxe Power Meter

020 8905 7273 Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60