AIR CONDITIONING R CONDITIONING C
engineers are safe in the knowledge that the joint will be correctly sealed. With traditional methods; there is always a risk that the fi tting could be left incomplete if the engineer cannot get the solder to flow correctly around the joint, resulting in leaks.
The beauty of press fittings is that they also require only a limited number o f tools to complete the job when compared to brazing and solder. Traditional methods of pipework jointing will always have a place in the m arket, particularly as press-fi t technology, despite being the tried and trusted jointing method of choice in the heating and plumbing industry, is still relatively new to the acr sector. However, there is no doubt that press is on the march as more and more engineers recognise the benefits this solution has over solder and brazing!
Spotlight on >B< MaxiPro onex Bänninger’s >B< MaxiPro is designed to
B< Ma manage the demands of air conditioning and
refrigeration applications. The copper >B< MaxiPro is a mechanically strong and resilient press-fi
quick and simple to use, providing a secure, permanent and leak-free joint and available in sizes 1/4” to 1-1/8”. >B< MaxiPro utilises Conex Bänninger’s three-point- press technology, whereby three presses are made; one each side of the bead and one compressing the O-ring, ensuring a permanent leak-free joint every time.
a mechanically strong and resilient press-fi t system that is q uick and simple to use, providing a secure, permanent and
The product is available in a host of fi ttings types, including straight coupler, reducing coupler, fi
t of fittings types, fi g coupler, fitting reducer , 90o bend, 90o street bend, 45o obtuse elbow, equal tee
>B< MaxiPro fi ttings can be used with annealed, half hard or hard copper tube that conforms to EN 12735-1 or ASTM-B280 in air conditioning and refrigeration applications.
>B< MaxiPro is also approved for use with a range of refrigerants, including R32, R134a, R404A, R407C, R407F, R410A, R507, R1234ze, R1234yf, R718, R450A, R513A, R448A, R449A, R407A, R427A, R438A, R417A and R422D.
90o bend, 90o street bend, 45o obtuse elbow, equal tee and stop end variants.
fi tting reducer,
Pump House
41
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64
