PLANT & MACHINERY SAFETY | MINITEC
COMPLETE FLEXIBILITY
MiniTec recently supplied The Proving Factory with a flexible manufacturing cell with Kanban storage. We find out more.
The Proving Factory’s recently opened assembly facility in Coventry will use a flexible manufacturing cell supplied by MiniTec UK Limited. The £22 million Proving Factory provides process development and ‘proving volume’ production of leading-edge low-carbon technology automotive components and systems. With major partners across the automotive industry, The Proving Factory takes innovative products and design ideas from small hi-tech British companies and university department technology transfer enterprises, and develops them for large-volume production for global vehicle manufacturers and tier one suppliers.
The 6000m2 assembly facility is
designed for flexibility with nine new products nearing the end of the development stage and two due to start production in 2015. The Proving Factory aims to manufacture 1,000 to 20,000 units annually, representing up to 20 products.
The flexibility and scalability of MiniTec’s Profile System allows The Proving Factory to easily modify and fine tune the set-up in line with their own aims to develop the best assembly and test procedures for producing competitive high-quality products.
Working closely with The Proving Factory team, MiniTec designed and supplied the majority of the equipment
50
for the assembly operations and end- of-line tests which includes several workbenches with Kanban racks and component storage. The design brief included the requirement to handle products from 30 to 300kg and defined a standard for tools and equipment storage – with re-configurability a prime consideration – to adapt the large variety of products that will be assembled using the cell.
“WORKING CLOSELY WITH THE PROVING FACTORY TEAM, MINITEC DESIGNED AND SUPPLIED THE MAJORITY OF THE EQUIPMENT FOR THE ASSEMBLY OPERATIONS AND END-OF-LINE TESTS WHICH INCLUDES SEVERAL WORKBENCHES WITH KANBAN RACKS AND COMPONENT STORAGE.”
MiniTec supplied the complete system within five weeks from receipt of order and further components or sub-assemblies were available on very short lead times. Karl Fawdry, manufacturing engineer at The Proving Factory said: “We were able to build and configure the first cell within four
hours of delivery to the Coventry site. MiniTec’s support has been invaluable in developing our need for flexible and reconfigurable assembly cells.”
Redesign and reconfiguration is made straightforward using MiniTec’s free-of-charge iCAD design software that is integrated with the customer’s preferred software system. iCAD includes interfaces with all common CAD packages and is also available for standalone design and development as an on-line tool with no CAD knowledge required. MiniTec’s Profile System also boasts the fastest assembly/re- asembly time for all major framing systems thanks to its Powerlock fastener – a single operation fixing requiring just an Allen key and no pre- drilling of the cut-to-length profile.
In addition to workbenches, Kanban and component storage systems, MiniTec’s modular aluminium profile based machine building system includes thousands of components that combine for highly efficient machine frame solutions with control system and motion components for electrical, pneumatic and hydraulic automation. MiniTec can provide separate components for customer assembly or build to customer requirements in-house or on-site.
www.minitec.co.uk
PLANT & MACHINERY SAFETY | TOMORROW’S HEALTH & SAFETY YEARBOOK 2015/16
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68