PAST, PRESENT & FUTURE POWER
Clarke Energy shares the history of decentralised power production and how it could affect the industry going forward.
Decentralised power production is also called distributed generation. It is not new, with Thomas Edison’s Pearl Street Station supplying New York City with power as early as 1882.
By 1900 distributed power plants accounted for 100% of global electric power generation capability additions. By 1950 distributed power had dropped to less than 10% of global new additions.
Coal power stations, gas turbines and nuclear plants dominated, creating large amounts of power at a single point. Large scale electricity transmission and distribution networks began to develop, moving this electricity over significant distances. The reasons are numerous for this change. They include financial considerations from economies of scale and the general public not wanting to be living close to a hazardous nuclear power plant or polluting coal power plant.
This trend is now on the reverse across the globe. The world is moving towards improving efficiency, increased resilience and reducing carbon emissions. Centralised power generation is typically not efficient. With power plants that burn fuel, such as coal power stations or gas turbines, as much as 60% of the original energy in the fuel can be emitted as heat. This heat energy is difficult to move distances to where it is needed and often is simply vented to the atmosphere. In addition, moving electrons down transmission lines results in losses that can be as high as 1.5%. This means that when you put your plug in the socket at home, you may be using less than 35% of the original energy in the fuel used to generate the electricity.
When using a gas-fuelled generating set close to the site of use – in a factory or hospital for example – the
32 | FEATURE
heat can also be recovered and used in boilers or for local processes. The generator can convert over 45% of the gas into usable electricity, in parallel with recovery of the heat an additional 40% points of efficiency can be added. This means a total fuel efficiency in excess of 85-90%. Better efficiency means less fuel consumption hence reduced costs and carbon emissions.
Other forms of renewable energy such as wind power and solar energy are also by their nature decentralised. The ability to harvest wind and the sun’s rays is determined by being able to do this where the wind blows or sun shines. They have little or no emissions and therefore are often more palatable to local communities than coal or nuclear power stations.
“The world is moving towards improving efficiency, increased
resilience and reducing carbon emissions.”
Waste management is also moving towards decentralisation with landfill sites in decline in developed nations. Fuel costs associated with moving the waste from the door step to landfill site many miles away are significant. Waste can now be economically treated more locally, and used as a fuel for decentralised power generation in anaerobic digestion facilities supplying power typically in the 0.5-3MW size range.
The trend is towards a power generation mix with numerous different technologies including both distributed and centralised power. This too creates challenges for the supply of reliable power to homes and businesses.
Decentralised power using generating set technology can be used to increase
resilience. With large, old, polluting coal power stations closing down, new nuclear power stations being bogged down with planning issues and politics, the available margin of spare generation capacity is reducing in countries such as the UK. This is creating a real risk of power outages in the future. Businesses with critical pieces of infrastructure – such as datacentres or hospitals, who cannot tolerate this, must look for alternative methods of ensuring their processes still function. Generating sets can operate either in ‘grid parallel’ mode or ‘island mode’ – i.e. producing electricity connected to the grid or isolated from it. In the event of a grid failure, the generating set can conduct a ‘black start’ bringing localised processes back to operation disconnected from the electricity grid.
There are further challenges being brought on the grid by the intermittency of renewable energy from wind and solar power coupled with the reducing in generating capacity. Wind turbines generate electricity when the wind blows, not necessarily when there are the morning and evening peaks from people boiling their kettles. In the UK the first Capacity Market auctions have occurred. The Capacity Market is designed to facilitate extra generation capacity that can be brought on at short notice to balance the grid. The trend in the most recent proposals is towards ~20MW gas-fuelled distributed peaking stations located across the country and able to start generating power at short notice in order to help balance the electricity grid and match supply to demand.
Other technologies such as demand side response and batteries look to provide a further drive towards a smart power grid with much greater levels of distributed power generation in coming years.
www.clarke-energy.com www.tomorrowsem.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38