This page contains a Flash digital edition of a book.
management modifications. One well- known property owner found that even without capital investment, it was able to save at least 20% of landlord energy use through basic, low-tech measures and good procedures. In addition to saving energy and expense, if you get really smart at managing energy use in real-time, there are opportunities for negotiating more attractive tariffs through dynamically adjusting demand.


Comparing the performance of your buildings with others of similar design or use gives a real sense of how big the opportunities for improvement might be, and it enables you to focus clearly on the low-hanging fruit of energy inefficiencies. A number of web-based tools are available, such as Carbon Buzz and Energy Deck, some of which are free. Carbon Buzz, for example, compares energy intensity (annual energy use per m2


) of a


given building to CIBSE TM46 sector benchmarks and to all buildings held on the database, filtered to include those similar to yours.


Even if you don’t compare energy use in your own building(s) with others, tracking energy use over time enables target setting and underpins investment decisions. For example, if service equipment becomes inefficient as it ages, monitoring energy use can alert you to equipment failures, unauthorised reprogramming of controls or changes in occupancy; enabling you to act quickly to respond to occupant needs without wasting energy.


The final reason for evaluating energy performance is to protect the value of property assets arising from the potential future threat of regulatory obsolescence if building performance falls behind standards required at transfer of ownership or tenancy.


HOW TO EVALUATE? The old adage: “If you don’t measure


it, you can’t manage it” applies but what should you measure, how, how often and how should you interpret the data?


Energy performance evaluation is a significant subset of overall building performance evaluation and, I would argue, undertaking a broader performance evaluation of the building gives valuable additional


twitter.com/TomorrowsEM


insight into why energy is being used, where and when.


For in-use buildings, best practice is to carry out a periodic study - say summer and winter - plus additional studies triggered by changes in use or replacement of key equipment. The evaluations should draw on data captured over the whole year, e.g. half-hourly meter data, internal and external temperature records and services operating records. Using CIBSE TM22, for example, you can capture and document the energy used by occupants and, combining this with an occupancy profile, predict the building’s expected energy uses. If your building has a good and reconciled sub-meter arrangement, you can record measured and disaggregated energy use, which can identify and quantify discrepancies (and hence any opportunities).


In order to use TM22, you’ll need data from sensors, thermostats, meters, etc. However, even if your building is minimally monitored, has no BMS or only has a main electricity/gas meter or a simple programmable timer on space and water heating, you can still use this information, together with counting and estimating hours of use for energy-using services and equipment (e.g. lights, computers), to get a pretty good estimate of where, when and how energy is being used in your building.


If this is starting to sound a bit complex, think of the savings you’re almost guaranteed to make. It’s also reassuring to know that specialist help is available through numerous consultancies and charities such as the National Energy Foundation, and many offer advice with no up-front cost but for a share of the savings made.


Energy performance evaluation will increasingly be an essential responsibility of Energy Managers, and will benefit all building stakeholders from shareholders to employees to customers. Whilst you’re likely to need external expertise for complex buildings and a detailed evaluation, you can carry out a basic evaluation with a little help, training and support, a common sense approach, good observational skills, and a willingness to act on the results.


www.nef.org.uk


What to look for:


• Building management systems not properly commissioned or set up at handover.


• No interlock on heating and cooling systems, allowing occupants to have both running simultaneously.


• Air-conditioning that is too high capacity for the area it serves.


• Heating and air-conditioning systems that are set either too high or too low, instead of allowing people to dress according to their own personal comfort.


• Air-conditioning systems that are left on in unoccupied areas when sensors would solve the problem.


• Ventilation fans that run overnight, removing heat from the building and increasing the morning re-heat load.


• No natural light or inappropriate lighting. Lighting is often inefficient, has zoning deficiencies or uses poor controls.


• Heating on, windows open. Fit window sensors that switch the heating off automatically when they are opened.


• Loading bay doors that are left open unnecessarily.


• Poorly maintained refrigeration – missing doors, broken hinges and worn seals.


• Doors in shops and offices either left permanently open or open/close too frequently.


• Uninsulated hot water tanks, pipework, valves, flanges and pumps.


• South-facing, highly-glazed buildings, without shading - leading to overheating and an increased requirement for cooling.


MONITORING & METERING | 29


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38