PRODUCTS We take a look at some of the latest produ
NOTRAX INTRODUCES THE MASTER FLEX HHP C12 MODULAR ENTRANCE
MATTING SYSTEM The new Master Flex HHP blends the functionalities of the innovative Master Flex system into a multi-zone entrance matting system designed specifically for use with high heels. Featuring all of the benefits of the original Master Flex system, the Master Flex HHP series provides a smooth and harmonious transition from outdoor to indoor from scraping to cleaning to drying, whilst the modified design prevents high heels from becoming stuck.
The benefits of entrance mats have been recognised by sustainable and environmental building assessors, such as LEED (Leadership in Energy and Environmental Design) and BREEAM (Building Research Establishment Environmental Assessment Method).
Wet, slippery floors are dangerous. As entrances quickly become wet on rainy or snowy days, smaller or inadequate matting can quickly become saturated making the situation worse. Properly specifying entrance mats for installation and projects is important to securing all of the benefits. The type, quality and size of mat installed will vary according to the amount of foot traffic, the use of the building, the environment in which the building is situated and many other factors.
Shoes should touchdown at least three times on the mat for proper scraping, cleaning and drying. As a rule of thumb, it takes 2m of a good textile surface to trap 42% of moisture and dirt, 4m should achieve up to 65% and 6m up to 90%. LEED recommends a permanent entryway walk-off system at all regularly used, exterior-to-interior entrances and entrances from covered parking garages.
Benefits of entrance mats
Large commercial buildings with heavy traffic areas can see as many as 5000 crossings a day. For public buildings with high daily traffic, the benefits of a good entrance matting system are measurable. A proper entrance matting system contributes to improving indoor air quality, acoustic performance, extending the useable life of interior flooring materials, improving safety, and reducing maintenance and cleaning costs.
The entrance is also the building’s first impression. As with any introduction - to people, places, or products - the first impression is critical. Entrances have to satisfy a variety of requirements including attractive design, high footfall and excellent functionality.
48 | PRODUCTS & SERVICES
The 50cm x 50cm tiles cover sizeable areas easily and can be assembled on-site for installation in recessed matwell frames in large entrances. The modularity means that the Master Flex HHP can be combined with the 692 Master Flex HHP D12 for a harmonious transition from out to indoor. Attachable beveled edges are available for loose lay installations to prevent tripping and allow inside and outside corners.
Easy Installation and Customisation Design-driven innovation
The Master Flex is a multi-zone entrance matting system offering all the benefits of a matting tile that is easily installed, rearranged or replaced. It is made from a durable natural rubber compound that is inherently resilient, anti-slip and withstands the heaviest pedestrian foot traffic. The mat has excellent adherence and adapts to any surface while the raised studs underneath allow water to drain through, keeping the surface clean and dry.
The Master Flex HHP can be installed by hand without the need for hammers or tools. The connection system of male and female connectors attaches together without the need for glue, screws, clamps, rails or frames making installation, literally, a snap. Simply lay the first tile in place then align the connection points of the following tile and lay it on top. Align, place, repeat. It really is that simple. For bespoke mat sizes, the rubber tiles can be cut with a utility knife using a metal ruler as a guide. Notrax Recess Fillers adjust the depth of existing mat wells to correct measurements.
The Master Flex HHP can be completely personalised with our custom printed logo carpet inserts. BrilliantStep printing offers state-of-the-art technology that allows 3-dimensional effects, fine lines and colour shading for each mat to have a truly individual image. Superior colour fastness is ensured in accordance with DIN54006. Artwork is supplied in 24 hours and the mat is printed 24 hours after the artwork is approved.
www.notrax.eu www.tomorrowscontractfloors.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64