PROCESS EQUIPMENT UPDATE
Longer lasting
P
Increased evaporation efficiency: hybrid ceramic bearing extends lifetime and reduces maintenance cost of fans for mechanical vapour recompression
rocess industry, chemical and pharmaceutical applications require high amounts of process steam, resulting in high energy usage. Therefore
mechanical vapour recompression is frequently used to minimise energy usage. A fan compresses the vapour, boosting it to a higher pressure and adds heat to it until the requested temperature has been reached. Finding the right components may in this case be critical for keeping maintenance costs low and for a long service life of the plant. TLT-Turbo has developed a fan series with a hybrid ceramic bearing for this purpose. Since the bearing is permanently lubricated, it no longer requires external oil supply. The fan series will be showcased at this year’s Achema exhibition.
Due to rising energy costs industrial companies put even more focus on how to optimise production processes. This includes the process industry where,
FANS
for instance, steam is required as the heating medium for the evaporation of aqueous solutions. Thus far steam was used only for evaporation and then discharged to the environment via condensers, which caused a great deal of energy to be lost. Now companies increasingly use mechanical vapour recompression where a fan compresses the vapour boosting it to a higher pressure and temperature so that it can be reused for evaporation. The resulting closed system rarely requires fresh steam supply.
FAN OPERATION POSSIBLE WITHOUT OIL SUPPLY The energy requirements to operate the fans is considerably below those to generate steam. This is what renders mechanical vapour recompression highly mechanical vapour recompression (MVR fans), TLT-Turbo’s experts uncovered even more potential for savings. The
The rings in the rolling bearing are made of steel, whereas the rolling elements are made of ceramic components
company transferred the bearing technology that so far was used mainly for wind power plants and machine tools to the fans. The result were fans with a hybrid ceramic bearing: the rings in the rolling bearing are made of steel, whereas the rolling elements are made of ceramic components. The bearing is already greased at the manufacturer’s and requires neither regular oil changes nor time-consuming oil supply as most other fan bearings do. This is also an advantage regarding hygiene, as the products cannot be contaminated during manufacturing. Since the plant is now made up of
TLT-Turbo has developed a fan series with a hybrid ceramic bearing
6
www.engineerlive.com
fewer components the maintenance and thus the operating cost could be reduced plant is operated in the subcritical range allowing even above-average increase in standard sizes that can be installed in fans are available both as basic version – fan on a base frame with monitoring sensors – and as full package with motor and frequency converter. Depending on the application users can choose from various special steel housings and impeller types. TLT-Turbo produces, for instance, bespoke models made of duplex or super- duplex stainless steels and upon request, even titanium impellers.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
