Bowls Renovation Pitchcare Classifieds
Bowling green renovations
fertilisers is when the immediate surface is dry, but with moisture present within the soil profile. Dry, windy conditions are to be avoided which may result in an uneven distribution followed by scorching of the sward. Fertiliser application must always be followed
by watering in one form or another. Always check the calibration of any machine
prior to an application in order to determine the correct rate at which the fertiliser should be introduced according to the maker’s instructions. Fertiliser distributors are used widely in turf
culture for spreading fertilisers evenly and efficiently. Any distributor should be able to carry out the following functions:
• Able to spread both granular and powder fertiliser at a wide range of application rates
• The application rate should be easily adjustable
• They should be adaptable to sow grass seed and apply topdressings
• They should be designed and built in a way that will reduce corrosion as far as possible
Autumn is a season of great importance for the bowling club greenkeeper. The regular playing fixtures come to an end, so thoughts can now turn to renovations and winter maintenance
The green should be thoroughly scarified in two diagonal directions in order to remove surplus growth and dead fibre (thatch). The resulting debris should be removed after each pass.
Scarifying can be done more quickly and effectively by using a machine such as a Sisis Rotorake or Graden fitted with thatch removal blades. These should be set to significant thatch depths ranging from 1 to 2cm. This should be followed by aeration to a depth
of 10 to 15cm using solid tines. If compaction or thatch build up is particularly
severe, hollow tines should be used. If the thatch is as thick as your index finger, then light scarification and solid tine aeration should be implemented. If the thatch is thicker than two fingers, then more drastic measures, such as hollow tining and greater scarification depth, must be considered.
Now is the time to dress the green with a sand
and organic dressing. This mixture is specifically designed for fine turf areas. Ideally, the composition for such mixtures is
around 70% sand to 30% soil (of the right particle size of around 0.25 and 0.50mm). No more than a 10% variance either way of this percentage is advisable. This work should be carried out when the
surface is dry in order to maintain a true surface. At least 4 tonnes of material should be applied,
possibly more if major scarification and aeration are implemented, i.e. bigger tines and slitting are made.
It is imperative that the topdressing is
thoroughly worked into the sward to avoid smothering the turf. The use of a dragmat or dragbrush will assist here. If any areas need reseeding, this should be
performed as soon as possible, ensuring that the seed is lightly covered by the topdressing at all times. The green will still require cutting; however, to avoid picking up the topdressing, the height of cut should be reset to 10mm. This setting may be used throughout the late autumn and early spring. Autumn conditions often increase the activity of
casting worms so the need for regular switching and brushing to dissipate the casts is advisable. Fertilisers are available in varying formats. The
regular use of salt based fertilisers is still the most common. They are applied to maintain health of the grass and appearance of the bowling green. It is also used to help assist in providing nutrition by which the plant may recover from stress. As with all turf surfaces, different nutrition
levels are applied at different times of the year, e.g. in spring and summer, more nitrogen is needed as the grass plant is actively growing; autumn and winter, more phosphorus and potash is applied to encourage root development. The best condition for the application of
The whole surface should be checked for any irregularities. Worn areas will require repair and levels may be renovated. The use of turf is acceptable, but the opportunities to purchase suitably turf are minimal. It is possible that a club could have its own turf nursery for obtaining quality turf at the right specification to be compatible to the green. However, I have yet to see any club provide such a maintenance regime. The choice of seed is regularly available,
basically a standard greens mixture comprising 80% Fescue and 20% Bent. After the completion of the autumn work on the bowling green, many clubs are of the opinion that the ground may be left unattended until the following April. This is far from the correct approach. The greenkeeper should aim to keep an eye on the green at regular periods over the winter.
The occasional surveillance of the green will
provide the opportunity of investigating any outbreaks of fungal disease and also enable the detection of any excessive grass growth. In any mild spells, it may be necessary to top
the grass to ensure that the sward does not receive a check in the spring by removing too much growth in a short period of time. Any growth over 18mm should be lowered to 12mm. Never cut any more than 1/3 off the length of leaf blade at any one cutting, otherwise this will destruct the root development of the plant. Walk the green to remove any debris or rubbish which may have accumulated to ensure that no damage will be caused to the machinery and equipment.
This article is from the Pitchcare archive and was originally part of a longer feature written by David H Bates Agronomy Services Ltd.
www.davidhbatesagronomy.com
144 I PC AUGUST/SEPTEMBER 2016
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156