PRODUCTS & EQUIPMENT
(Left) BB series - High Speed Beveling Benches
(Right) CTA High Speed Cutting and Beveling Machines
(Below) TNO cutting and beveling machines
the tube to cut and beveled is held stationary. The CTA’s OD clamping devices keep the pipe immobilized during machining operations. The tool bits, mounted on the rotating plate are put into rotation around the tube to perform the cut. The forward and reverse feed of the tool bits are handled mechanically during the rotation of the tool holder plate. While cutting, the machine performs beveling on both ends. The tool holder carriages, mounted on the rotating plate are equipped with housings which can accept several types of tool blocks. The CTA machines have earned an excellent reputation around the world in a variety of industries; Nuclear, Power Generation, Oil and Gas, Tube
Processing, Prefabrication Workshops, Pipelines, Chemical and many more.
Portable machining PROTEM has designed a very wide range of portable equipment for welding preparations on tubes, pipes and pipelines. The range of equipment includes: • ID Mount bevellers • OD Mount bevellers • Orbital Tube Cutting, and Pipe Cutting and Beveling Equipment • High Speed Cutting, Facing, Beveling, and Counterboring Equipment
These machines can be pneumatically, hydraulically or electrically driven.
TNO Series:
The TNO machines cleanly and efficiently cut and bevel tubes and pipes with diameters ranging from 4.5” ID to 72” OD (114.3 mm
These Orbital Cutting and Beveling machines, are specially designed to fit your piping or tubing prefab applications on the job site or at your fabrication workshop. You will find that these machines cut and bevel
www.internationalmetaltube.com
heavy wall pipes faster than any other machine!
The TNO range of machines are electrically driven and equipped with a hydraulic power unit for the automatic clamping system. Clamping screws located on the front and back of the machine adjust the concentricity and create a perfect alignment and perfect squaring.
There are many benefits to the TNO machines. They are portable, rigid, fast and accurate. They save space in your workshop, or can be integrated into your production lines. They also save man hours by avoiding grinding operations, flame cutting, difficult handling and setting of pipes on a lathe. Most importantly, they always provide outstanding results in a short amount of time, with unmatched quality and precision you can count on!
Protem SAS, ZI les Bosses, 26800 Etoile sur Rhône, France, tel. +33 47557-4141, e-mail: contact@
protem.fr,
www.protem.fr
IMT December 2015/January 2016 23
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32