PRODUCTS & EQUIPMENT
Protem pre-fab machines
Featuring, the BB high-speed beveling benches, the CTA Series high-speed cutting and beveling machines and the TNO heavy-duty severing and beveling machines
BB High Speed Beveling Benches for diameters ranging from 1” up to 72”
The BB High Speed Beveling Benches are the most powerful and reliable equipment for achieving a perfect weld end preparation in a matter of just a few seconds. This is the equipment you will need for all your projects that require a perfect weld end preparation! They serve virtually all
industries where the weld quality is critical and projects must stay on schedule and they allow to drastically increase the project productivity!
22 IMT December 2015/January 2016 These machines are easy to
install and are quickly adjustable to any size of tube or pipe within the machine’s range. They will machine the pipe ends in one smooth pass, in seconds! Perfect for use on Heat Exchangers, Pipeline Construction and Maintenance, Onshore and Offshore Construction and Maintenance, Prefabrication Workshops, Shipbuilding and many other applications. The BB Machines are used for beveling, facing and counterboring operations. These operations can be processed individually or simultaneously.
They will perform repeatable high quality bevels with an I, V, J, X shape or compounded bevels. Perfectly suited for either manual or automated welding processes. These machines can achieve perfect weld preparations on virtually all materials; carbon steel, stainless steel, exotic alloys, such as Incoloy, Hastelloy, duplex and super duplex.
CTA High Speed Cutting and Beveling Machines: The CTA Series Machines are able to machine pipes within a range
www.internationalmetaltube.com
machines for your production and prefabrication requirements. The CTA machines save space in your workshops and can be integrated in your production lines for unmatched results. be cut and beveled within a few seconds. Machines capable of machining larger diameters are also available upon request. Machining is performed in a cold cutting process which does not produce a heat affected zone. The result is extremely high quality weld end preparations. To machine the pipe ends with the CTA series machine
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32