WELDING
advanced engineering polymers. These innovative products offered significant attractions over both vacuum and glove box alternatives; a significant reduction in cost, very small floor footprint and availability of a range of sizes from stock. Since that time the HFT® product has been developed and is rapidly becoming the preferred alternative enclosure.
Technical specification The vertical sides are made from translucent material and the top is constructed using optically clear sheet. Ultra violet stabilized engineering polymers are used throughout during manufacture. Material thickness is nominally 0.5 mm (480 microns). A principle access zip is fitted and this has a total length typically 60% greater than the enclosure diameter ie a 900 mm enclosure will have a 1400 mm long main zip. Additional entry points provide for operators gloves. A service panel incorporates access ports for welding torches and for electrical leads and cooling water supplies. A purge gas entry port and an exhaust valve to vent displaced gas to atmosphere are incorporated into each enclosure.
Fig 3. Flexible Welding Enclosure®
In the unlikely event that a repair is necessary, it can be carried out by the user on site. A kit is provided with each enclosure for this eventuality.
Cost
Size for size the HFT® range costs less than 10% of a metal glove
box and only 2% that of a vacuum system.
Flexibility Size and shape can be made to meet customer requirements. Standard models from 0.3 to 3.0 cubic metres are available from stock. Weight is very low and the enclosures occupy little space – the collapsed volume of a 1.25 metre diameter system is less than 0.2 cubic metres and weighs only 8 kg. They can thus be moved easily and stored efficiently so floor footprint is minimised.
Large viewing area The entire upper section is manufactured from optically transparent ultra violet stabilized engineering polymer. This offers the opportunity for use by several operators at the same time – ideal for training purposes.
Fig 2. Metal glove box used by flushing with argon
Mulitiple access points Systems can be manufactured with numerous access locations for personnel gloves and gas/ electrical entries. Large leak-tight zips afford easy access
www.internationalmetaltube.com
for components. Flexible Welding Enclosures®
are now used by leading manufacturing companies across the globe. The aerospace, automotive, biochemical, medical, food and beverage, semiconductor and nuclear sectors all take advantage of the low cost and ease of use. All these operations are exposed to some extent to the need for extreme levels of quality control over cleanliness during manufacture. Contamination introduced during fabrication can so easily lead to loss of strength and corrosion resistance. Particulate contamination raises issues of expensive litigation or at best rejection of product.
All standard enclosures are packed in a box 1160 x 670 x 280 mm irrespective of size and their shipping weights are typically: • 7.2 kg for a 36” (900 mm) diameter enclosure
• 8.7 kg for a 48” (1200 mm) model
• 10.7 kg for a 60” (1500 mm) size IMT March 2015 15
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28