PRODUCTS & EQUIPMENT
join the best
7 –11 April 2014 Düsseldorf, Germany
International Tube and Pipe Trade Fair Meeting point: Tube 2014 in Düsseldorf!
join the best – welcome to the world’s leading trade fair for the tube industry! Those who wish to find comprehensive information about the latest innovations in tubes and pipes, manufacturing, processing machinery and tube accessories need look no further. It can all be found here at the world’s most important exhibition – the meeting point for international experts, specialists and global market leaders. Special focal point at Tube 2014: Plastic tubes. A special area is reserved for them, because the question of materials is becoming more and more important.
An important fixed date in your calendar – your visit to Tube 2014 in Düsseldorf!
Cleanliness of HC Coils’ tubular copper components is essential when brazing them in a heating or cooling block, otherwise porosity occurs in the joint.
our tube components carried out at their technical centre in Alton. “The machine has been very reliable since it was installed. I think only one seal has been replaced in two years and that was done on the same day by a Turbex engineer. “Apart from clearing out the maintenance is to empty the machine annually and give it a thorough clean. For the rest of the time, it runs without a hitch.”
Apart from clearing out only other maintenance is to empty the machine annually and give it a thorough clean. For the rest of the time, it runs without a hitch
During operation, the basket is pulled forward from the machine on its central spindle, approximately 350 copper return bends or header legs are loaded and the basket is pushed back until it engages with a drive mechanism at the back. To ensure thorough penetration of all components, water and detergent are sprayed through the spindle and The program is set to rotate the basket at two revs per minute and spray water at 70ºC for 5 minutes, after which a 7-minute drying cycle ensures that the parts are free from water when the operator removes them. All process parameters can be adjusted, a facility that HC Coils has recently exploited to process namely mild steel hanging brackets that have to be oil-free before being powder coated.
More information on Turbex Ltd
john.huntingdon@
turbex.co.uk www.turbex.co.uk
www.internationalmetaltube.com
www.tube.de
Plant and Machinery
Pipe and Tube Processing Machinery
Bending and Forming Technology
Tube
Manufacturing and Trading
Tube Accessories
Profiles
Messe Düsseldorf GmbH P.O. Box 10 10 06 _ 40001 Düsseldorf _ Germany
Tel. +49 (0)2 11/45 60-01 _ Fax +49 (0)2 11/45 60-6 68
www.messe-duesseldorf.de
IMT December 2013/January 2014 9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32