This page contains a Flash digital edition of a book.
Timber to Timber Joist Hangers Medium Duty Hanger (Standard Leg)


Manufactured from 1.5mm thick galvanised steel. Suitable for joist depths of up to 250mm. Design


Product Reference SWL(kN) Width(W) B340


B340 B340


10.87 10.62 10.53


Bearing surface 50mm Medium Duty Hanger (Long Leg)


Manufactured from 1.2mm thick pre- galvanised steel the B460 and B610 offer 460mm and 610mm long legs, suitable for I-Beam applications, either face fixed or wrapped over supporting joists. For loft conversion applications


B460 B460 B610 B610 B610


7.0 7.0 7.0 7.0 7.0 7.0


where the hanger extends below the supporting beam, a maximum drop of 75mm is recommended. Design features a location tab on the hanger base, designed to allow quick and accurate alignment of the hanger.


Product Reference SWL(kN) Joist Widths(W) B460


Side(S) Leg(L) Box Qty.


38/44/47/50/63mm 185mm 460mm 25 75/88/100mm 125/150mm


185mm 460mm 25 185mm 460mm 25


38/44/47/50/63mm 185mm 610mm 25 75/88/100mm 125/150mm


Bearing surface 50mm 50mm wide Strap Legs Mini Hanger


Ideal for trimming around ceiling hatches and other similar light duty applications.


Product Reference S.W.L.(kN) MINI/38


MINI/44 MINI/47 MINI/50


3.54 3.54 3.54 4.10


Bearing surface 40mm


Please note: Safe Working Loads stated above are the lower of the load at 2.5mm deflection of the hanger tested or medium term loads in accordance with BS5268/EC5.


Full Data Sheets are available for the above products, based on independent destructive testing and analysis carried out by Ceram Research or Huddersfield University.


A270 Joist Hanger tested by Trada Technology. ® Manufactured in the UK www.bpcfixings.com 9 To order or find out more


call 01924 364 794 or scan the QR code.


Manufactured from 0.9mm thick galvanised steel. Suitable for timber depth up to 100mm.


Width (W) 38mm


44mm 47mm 50mm


Height (H) 71mm


68mm 67mm 65mm


Box Qty. 250


250 250 250


185mm 610mm 25 185mm 610mm 25


features a location tab on the hanger base, designed to allow quick and accurate alignment of the hanger.


Side(S) Leg(L) Box Qty.


38/44/47/50/63mm 110mm 340mm 50 75/88/100mm 110mm 340mm 50 125/150mm


110mm 340mm 50


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32