Galvanised Single Piece


Joist Hangers A comprehensive range of single piece non-welded timber to masonry hangers, designed to support timber joists from brick or block walls. As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600 compliant with BS6178: Part 1:1990 and to the requirements of BS5268.


Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2


and above. Hangers


150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists


All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardized square twist nails.


Joist Hanger Type S (Standard) Top Flange 75mm


The standard hanger is designed for building into brickwork or blockwork. Available in the following depths and widths.


Width 38mm, 44mm, 47mm, 50mm, 63mm, 75mm, 100mm, 125mm, 150mm


Depth 100mm, 125mm, 150mm*, 175mm*, 200mm*, 225mm*, 250mm*


Bearing surface 75mm Order Code = SPMH/S/width x depth i.e. SPMH/S/50x200


Joist Hanger Type R (Return) Top Flange Up To 250mm


The return type hanger is designed for similar application to the Type S but with the advantage of a return flange (25mm as standard ) which greatly increases lateral support by giving the top flange additional resistance to pull out. We would recommend the use of TYPE R return flange hangers wherever possible for all timber to brick applications.


As standard the return hanger is manufactured to suit 100mm blockwork, however any length of top flange is available to order.


Width 38mm, 44mm, 47mm, 50mm, 63mm, 75mm, 100mm, 125mm, 150mm


Depth 100mm 125mm 150mm* 175mm* 200mm* 225mm* 250mm*


Bearing surface 75mm Order Code = SPMH/R/width x depth(block size) i.e. SPMH/R/50x200 (100)


Please Note The Type ‘R’ Return Hanger is not a Restraint Hanger. Restraint Hangers are specials/manufactured to order.


® Manufactured in the UK www.bpcfixings.com 3 To order or find out more


call 01924 364 794 or scan the QR code.


Type S (Standard)


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32