BPC Metalwork Brochure Timber to Timber
Joist Hangers Produced from galvanised steel to BS EN 10346:2009 DX51D + G275 as standard, or stainless steel available to order. Galvanised hangers must be fixed using 30 x 3.75mm sheradised square twisted nails in all pre-punched holes.
Light Duty Hanger (Short Leg)
Lightweight hanger manufactured from 0.9mm thick galvanised steel.
A190/44 A190/50
6.43 6.43 6.43
Suitable for joist depth up to 175mm.
Product Reference SWL(kN) Width(W) Side(S) A190/38
Leg(L) Box Qty.
38mm 100mm 190mm 100 44mm 100mm 190mm 100 50mm 100mm 190mm 100
Bearing surface 50mm Light Duty Hanger (Standard Leg)
A lightweight galvanised joist hanger providing a strong connection and quick and easy installation. Designed with wider 50mm strap legs to enhance performance with increased
Product Reference A270/38
A270/44 A270/47 A270/50 A270/63 A270/75 A270/88 A270/100
SWL(kN)
C16 timber C30. timber 5.30
5.30 5.30 5.30 6.22 5.94 5.94 5.94
Bearing surface 50mm
Please note: Safe Working Load refers to 50mm wide hangers - characteristic strength/slip modulus/medium term loads are available for all sizes 38 -100mm.
5.87 5.87 5.87 5.87 6.81 6.50 6.50 6.50
nail spacing. Suitable for joist depths of 150 to 250mm. Leg length can be adjusted by wrapping over to suit joist height. Also suitable for face fixing.
Width(W) Side(S) Leg(L) Box Qty
38mm 126mm 276mm 100 44mm 123mm 273mm 100 47mm 122mm 272mm 100 50mm 120mm 270mm 100 63mm 114mm 264mm 100 75mm 108mm 258mm 100 88mm 102mm 252mm 100 100mm 95mm 245mm 100
A270
8
Tel 01924 364 794
© BPC 2011/12
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32