With a scientifically designed cultural plan, the greenkeeper will be able to adjust the height and frequency of cut to meet a wider array of strategies
golf courses have now become overpowered. My own club for instance, only measures 6,200 yards. Twenty years ago, the first hole played a drive and 3 or 4 iron. Now days, golfers require only a 6 or 7 iron for the second shot. This increase in power has left many courses defenceless, leaving putting as the last challenge remaining to the serious golfer on courses which are becoming shorter through technology.
Putting is an art which can and should
remain a challenge on all courses. Greens that are very flat will have very little break in the putt with greens stimpmeter reading at seven or eight feet. Increase this speed to ten or eleven and you start to have some slope there, and they become trickier to read. Increase this further up to twelve and you won’t have flat greens any more! But, probably, the most important reason
for keeping your greens fast is that the golfers prefer this type of surface. They are our customers after all. There was a recent study completed in America about green speed. The ideal stimpmeter reading preferred by golfers in that survey was 10.5.
need to be at the top of the list if a greenkeeper wants to maintain a tight cut:
Aeration
The first is aeration. Aeration has, traditionally, been done throughout the winter months. This is when the course is quieter and, generally, golfers put up with this sort of operation. But this is not the best time to aerate. The summer months are when your plant will be under enormous pressure through maintenance regimes and play. Help is needed to move air and water through the profile. My regime is to deep spike monthly throughout the summer. I also put a little bit of heave on the machine to create ‘cracking’ in the soil. I do this with a small 8mm tine, wide enough for a dressing to go into, but narrow enough to keep disruption to a minimum. It will allow oxygen to get to the roots when they need it most and relieve surface compaction.
Topdressing
The second procedure is topdressing or ‘sanding’. To create and cut smooth greens,
this is a grave mistake. Verticutting a green aggressively and frequently will produce an upright plant. This will allow the ball to roll across it with minimal friction. When verticutting is decreased, the plant is allowed to grow laterally and drag or ‘nap’ will affect the ball roll.
Major equipment manufacturing companies are now encouraging grooming in place of verti-cutting, but their motives may have more to do with sales than exciting golf. By grooming frequently, the height can
remain higher thus easing the sustainability risk. But the problem with grooming is that it puts a lot of stress on the outside or perimeter cut of the green and, in my opinion, grooming should never be substituted for verti-cutting. A further problem with reducing the verticutting regime is that it will increase the thatch build up in the top surface. This again will cause the green to become ‘nappy’ and cause drag on the ball roll. By putting the emphasis on the three
procedures above greenkeepers can move toward a course regime that can sustain a
Stimpmetre in action
How many times have you heard a golfer say to the greenkeeper “at the course down the road, the greens are much faster; why can’t we have faster greens here?” Well now that is possible, provided the course has a solid maintenance plan to support this strategy. To cut a green at any height without any cultural plan or ‘back up’, will put the grass plant under stress. This could lead to problems such as thatch build and disease. However, cutting a green at any height is not a natural event for any plant. Grass plants are supposed to flower and reproduce. It doesn’t matter what height you cut, cutting puts stress on the plant. But this is where an intelligent cultural plan comes to the rescue. With a scientifically designed cultural plan, the greenkeeper will be able to adjust the height and frequency of cut to meet a wider array of strategies.
A cultural plan, when teamed with an
appropriate maintenance plan for cutting greens, is not the entire solution. A combination of other factors also needs to be considered to keep greens healthy, no matter what the depth of cut. However, three additional procedures
Straight sand dressing
topdressing is a must. This will help to maintain tighter cuts. The conventional way of topdressing was to apply a 70/30 or 80/20 sand/soil mix. But a lot of people, myself included, are going away from using this type of mix and using straight sand. There are a number of reasons for this. The first is cost. A sand/soil mix will cost
around £20 per tonne more than straight sand from my supplier. When you are applying 200 tonnes per year, the saving is significant. Drainage is also a factor. The most important factor for cutting tight greens is to have a dry surface. By going with a pure sand dressing you will be creating a sandier rootzone with greater pore spaces for water and air to access roots. But, remember, the most important thing with topdressing is frequency. Ideally, light, fortnightly applications should be applied which will help to keep the surface firm.
Verticutting
The third procedure is verticutting. There has been a lot of debate about this operation over the last few years. The disturbance theory for one, has called for it to be reduced or even eliminated. I think
The 11th green at Ealing Golf Club cut to 2mm
low cut. A well maintained fast green produces the best ball roll and, to achieve this, the height of cut must be low. A poa or bent based green cut at 4mm will not produce a fast ball roll unless additional practices such as rolling and double cutting are applied. For everyday play this is not feasible or healthy and, if greenkeepers were to do this regularly, it would place the grass plant under even more stress. By cutting at 2mm, you will be able to keep the greens speed fast each day with much less plant stress.
So what will all this do for the
greenkeeper’s health? Maintaining surfaces that customers want will decrease your stress levels. Contrary to what many people believe, you won’t be making a rod for your own back. You can increase membership and societies which will, in turn, increase the clubs revenue. Forgive the pun, but there really could be a short cut to better golf.
Greg Evans runs the Complete Golf Solutions consultancy company. He can be contacted on 07951 157208 or by email on
gregevans1973@hotmail.com.
53
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124