74 TABLETING
A cool tablet press S
Gerd Hüffmann presents an ideal tool for the compression of heat-sensitive products
ome pharmaceutical and nutritional products are adversely affected by heat
exposure during compression. Vitamins and antibiotics can deteriorate when exposed to high temperature, compromising the effectiveness of the finished drug. In other cases, products or product ingredients (e.g. Ibuprofen) may melt, leaving sticky deposits on die plates and punch tips, causing compression force and thus weight variations, product losses and reducing the effective operations speed (and thus output) of a tablet press. Especially critical are the temperatures of product contact parts exceeding 30°C. A tablet press that is ‘cool by design’ therefore creates a multitude of advantages for its user and the products being compressed on it. Tere are a number of
measures that can be effectively taken to reduce the heat that is generated by and within a tablet press. Replacing a typical drive assembly – consisting of an inverter driven main drive, gear box and transmission belt –with a water-cooled torque drive system is one measure. Eliminating the gear box not only cuts out an unnecessary source of heat generation but also helps to reduce energy losses and the need for gear-box maintenance, e.g. regular oil changes, or cleaning out of grime caused by fine dust abrasion from a transmission belt. As an added
www.scientistlive.com
advantage, torque drive systems offer an excellent dynamic behaviour due to the availability of constant torque through a wide speed range. A closed-circuit liquid
cooling circuit for the actual (torque) drive unit, ensures that there is virtually no heat transfer to the main shaft of the press and thus the die plate. If ‘active cooling’ is desired, the cooling system can be connected via a heat exchanger to chilled water, providing a noticeable cooling effect. In an ideal situation, as for instance on a Romaco Kilian KTP series press, even the dynamic seal between the die table and the base of the compressing chamber is integrated in such a cooling circuit. Using closed punch bellows
(which requires the use of an appropriately designed die table) is another method to reduce heat. Te use of closed punch bellows, which do not have air-vents/air exchange with the compression chamber allows for generous oil lubrication settings without any risk of tablet contamination (black spots). Te increased lubrication effectively reduces friction of the punches within the punch guides (cams) thus minimising heat and as a side effect considerably reducing wear.
Low friction compression rollers Where there is friction, there is heat. Terefore the aim is to compose the compression rollers of such materials and design as to prevent or at least reduce friction in the roller movement, while at the same time ensuring that there is sufficient friction between the roller surface and the punch head to make the roller turn.
Tis requires the use of low
inertia, low friction bearings, limiting punch slip and heat generation. Tis is aided in effect by roller materials that are lightweight and extremely durable at the same time. One last way to reduce heat
is via air circulation and/or dust extraction. Allowing for large air volumes to circulate through the technical area of the machine not only transfers unwanted heat from the technical compartment, but also provides effective cooling for components within the airflow. Tis is assisted by effective dust extraction system, removing dust (and warm air) from the compression chamber. Where there is a tablet press used that effectively combines all the above measures, it is almost guaranteed that that there will be no detrimental heat influence on any product compressed, resulting in superb product quality and the highest possible yields.
For more information ✔ at
www.scientistlive.com/eurolab
Romaco Kilian solutions are cool by design
Gerd Hüffmann is with Romaco Kilian.
www.romaco.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92