Wearable Electronics
Protecting the future of electronic developments
‘Wearable’ is a term that was predominantly associated with the clothing industry. However, as Electrolube explain, it is now trending for a whole new reason. Harnessing the electronic functions used in everyday life and incorporating them into devices and accessories that can comfortably be worn on the body, is leading us into the era of wearabletech
E
veryone is talking about wearable technology, and with such a wide scope of applications and products, the industry is expected to see another large growth in 2015. Developments are continuing at a rapid rate with Gartner predicting that by as soon as 2017, 30% of wearable devices will be completely unobtrusive to the eye.
In all types of use, the technology is designed to make us more efficient - in business, the ongoing development of smart watches for example, will allow multi-tasking, process tracking and increased involvement during travel and when on the move. There are also a number of new developments taking place, showing the use of wearable technology in different industries. For example, within the fashion industry companies such as CuteCircuit are designing interactive clothing where the colour or design can be controlled via smartphone apps or twitter feeds.
Analysis and research Key factors within the wearable technologies industry is analysis and research. In sport for example, there are seemingly endless possibilities to analyse and improve one’s game with wearable technology. Whether it be via the use of Google Glass to aid performance within the sport, navigate a route and send a message during training or by the use of many other sensor-based devices that can analyse technique, speed or posture for example. In the medical industry the ability to analyse and treat patients using wearable technology is also offering new avenues of research.
The technologies that such wearable devices are utilising are already common place however, and are being adapted for their use in new applications. For example, the devices usually have to connect to a smartphone or computer in order to relay information or data. As a result, the
24 July/August 2015
wearable devices may have wireless or Bluetooth connectivity or as with navigation devices, may incorporate GPS. In addition, a number of applications for wearable technology may use sensors to detect a specific change and provide an output, which again may be transferred to a separate receiver.
Alongside the challenge of actually designing a functioning device, the challenge that wearable technology poses is the nature in which this technology will be used and primarily, the environments that the device may be used in. For instance, a temperature sensor on a static device will have to withstand the temperatures within that environment and any thermal shock or cycling that may take place. A temperature sensor in a wearable device has the added consideration of physical interactions - the device will be
system or via a sensor to record changes in information gathered. This connection to other devices will operate via radio waves and therefore, any protection compound used must allow RF signals to be transmitted without any interference.
moved, worn, may see impact, may be flexed and potentially exposed to a number of additional elements, such as water or chemicals, for example. It is therefore imperative that these devices are protected accordingly. Protection can be provided in the form of encapsulation resins or conformal coatings. The variety of potential applications can also generate another challenge in selecting the most suitable protection compound. The wearable device is likely to use some form of connectivity, whether it be direct to another device or
Components in Electronics
Greater understanding To enable a better understanding of likely performance, it is possible to draw on experience from other industries and technologies. For instance, if we think of a wearable device that can be worn by a swimmer to monitor heart rate and general health, it is immediately understood that this device must still work when immersed in water. Any changes in temperature will be minimal but quite rapid and the frequency and length of time the device could be immersed in water is unknown. It should therefore be assumed that the device is constantly operating when immersed in water. This application can be likened to that of a sonar buoy used in marine applications where sensors are utilised for providing vital information about the sea environment. In this case, the device will have to send an RF signal and operate when constantly immersed in salt water - a similar environment to that of the wearable health tracker worn by the swimmer. We can also elaborate on the information we have already gained from other industries. For example, salt water is generally more corrosive than the water found in a swimming pool and therefore the application experience gained from the sonar buoys will show the performance of a device protected with a suitable compound, such as Electrolube UR5041, in a similar but more aggressive environment. This is obviously just one example of many different considerations - the degree of flex and toughness of the device, the operating temperature range and the possibility of any chemicals coming into contact with
the device are all possible factors to take into account during the selection process. Each application will have its own criteria in terms of performance, environment and expected use and in all cases, a reliable and accurate response is required from the wearable device. An example of application requirements is given in the ‘Sudden Impact’ wearable device challenge being conducted by Element 14 where Electrolube are one of the industry partners. The challenge is to develop a wearable device for athletes that provides vital health information to increase safety on the field and monitor the condition of athletes in real time, thus reducing sports related injuries. In this case, we know that the device will have to be protected from shock, potentially water or other pollutants and allow wireless connectivity. As with all wearable devices there is the possibility that LEDs or displays may be present and therefore the protection offered will need to be clear and maintain its clarity over time. Some say that 2015 is the year of the wearable where others feel there is still more work to be done. A large number of devices are still in their testing phase and performance, benefits of use and long term reliability need to be confirmed. The concept and new developments in this field are what will continue in the future and with the variety of devices possible will come the vast array of requirements, which will define the need for a suitable protection medium. Wearable technology is designed with the intention to make everyday tasks easier and more accessible. It will encourage different methods of interaction and communication, again increasing our mobility within the electronic world and thus shall further enhance relationships and collaborations in this field.
www.electrolube.com www.cieonline.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45