Materials/Processes
Rotary lobe pumps help to reduce downtime
Michael Groth reveals how rotary lobe pumps are improving operations at a wastewater treatment plant in the USA.
A
t a main wastewater treatment plant serving a city in the state of Delaware in the USA, plant operators turned to
rotary lobe pumps with full-service-in-place (FSIP) design to replace existing pumps, leading to a decrease in maintenance and downtime. The wastewater treatment plant included a high-rate activated sludge plant, three pump stations, industrial pre- treatment program, industrial leachate and sludge disposal. Netzsch provided the company with new pumps that have greatly lowered maintenance and downtime in two different sludge- handling applications, involving transporting thickened sludge and digester recirculation. The first Netzsch Tornado T2 pump with an FSIP
design replaced an existing pump that wasn’t working to the customer’s satisfaction. The plant operators then also replaced a second pump with a Tornado T2. The plant operators recall that the two previous pumps would go down approximately every three month and the longest running pumps would last about one year. The two new pumps have now been running continuously for two years. Two seals were replaced in
The large front cover can be easily removed and gives open access to the entire pump chamber to facilitate maintenance.
that time, but with easy access through the faceplate, that was a simple operation.
Digester circulation line benefits According to one of the plant’s maintenance engineers, some of the sludge digesters have always had problems with gas bounding. The plant had previously been using recessed impeller centrifugal pumps. The Netzsch pumps that replaced these pumps have been running almost six months in the sludge circulation application without any downtime and have completely solved the air-bounding problem. Another advantage the plant has noticed is that
as the Netzsch pump is belt-driven, there is no oil. Plant operators don’t have to worry about putting in the wrong oil or running out of oil. There is a small container that puts a small amount of oil on the seal – but that’s it. Plant maintenance staff regularly check the pumps
to see if the lobes need to be changed, but staff report that the lobes are not yet showing any signs of wear. n
For more information ✔ at
www.engineerlive.com/epe
The Tornado T2 rotary lobe pump is used in operations in the sludge transfer line.
36
www.engineerlive.com
Michael Groth is head of Business Field Environmental & Energy at Netzsch in Germany.
www.netzsch.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68