Exploration • Drilling • Field Services
What about HVAC? Jan Stoeken reveals why it’s worth giving proper consideration to HVAC. I
f not thought about, HVAC can be a highly disruptive issue on a project. HVAC for offshore and industry comprises more than just air conditioning. Other aspects such as dilution of explosive and toxic gases, smoke removal
in case of fire, ventilation of escape routes, heat removal of E&I rooms under emergency conditions and heat recovery is also part of HVAC engineering. Developing HVAC begins with inventory of the applicable regulations, client standards, room requirements and internal and external heat loads. Although HVAC is based on physics and human metabolism, the different regulations and standards result in various designs. Tis already starts with the minimum fresh air ventilation rates per room function, which determines the basis for most designs. Te minimum ventilation rates are increased if required for dilution of gases or odours. Te external heat loads due to local climate or
the client’s imposed outdoor design conditions combined with the air flow define the capacity of the air handling units and connected utilities. Keep in mind that capacity and equipment size are directly related and that the possibility for reducing the size of HVAC equipment is therefore directly related to the applied regulations and standards. High internal heat emissions are best removed by local cooling equipment, but whether this is allowed depends on the project specifications. If it is not allowed, increased supply airflows and consequently large ducting will be necessary. Especially for engine rooms, it’s usually a lively discussion. It’s the task of HVAC engineers to define a solid design basis that takes into account all the abovementioned factors. Heating or cooling of the fresh airflow to
the desired supply air temperature is an energy- consuming process. In modern designs the use of waste heat is common practise. Energy for heating is obtained from main power generation (gas turbines or diesel generators) with electrical back-up in case the main power generation fails or operates on partial load. Te feasibility of using waste heat is depending on the operating philosophy of the platform and the required energy for heating. Especially in harsh climates, additional heat recovery systems could be necessary. Tere are more (efficient) heat recovery systems available, also for cooling, which is common practise
30
www.engineerlive.com
in onshore commercial buildings, but the reliability in offshore applications is not yet demonstrated. Safety, reliability and proven design are keywords in equipment selection, resulting in a conservative approach that is not directly in favour of relatively new and more energy efficient solutions. To avoid excessive overcapacities in HVAC equipment design, a thermal building simulation program is in place, using design climate files based on real climate data in combination with an accurate 3D model (the disadvantage of oversized HVAC equipment is unnecessary space consumption, a not optimal capacity control and unnecessary investment costs).
Te program is used to establish equipment capacities and to investigate the thermal behaviour of rooms under specific circumstances. For example, what is the temperature curve in UPS and battery rooms during failed or stopped ventilation/cooling and what is the time period left for intervention? A new development is integrating HVAC calculation software with standard 3D model software. Present focus is on integrating the thermal simulation software and duct pressure drop and noise calculation with Revit MEP. l
For more information ✔ at
www.engineerlive.com/iog Jan Stoeken is with PDE in the Netherlands.
www.pdebv.nl
Fig. 1. A thermal building simulation program investigates the thermal behaviour of rooms in specific circumstances.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84