Process Equipment Update
Increased rates of heat transfer from latest heat exchangers
High heat transfer capacities, along with increased surface area, reduced fouling and ease of maintenance are the driving forces in heat exchanger technology development and use. Sean Ottewell reports.
Eine hohe
Wärmeübertragungsleistung einhergehend mit einer größeren Oberfläche, Wartungsfreundlichkeit sowie eine geringere Verschmutzung sind die treibenden Kräfte in der Entwicklung und Nutzung von Wärmetauschertechnik. Sean Ottewell berichtet.
Des capacités de transfert thermique plus élevées, ainsi qu’une surface augmentée, un encrassement réduit et une maintenance facile : tels sont les éléments moteurs du développement et de l’utilisation de technologies de l’échangeur de chaleur. Sean Ottewell témoigne.
I
n Turkey, HRS Heat Exchangers has supplied WABAG with a customised thermal transfer solution for use in a sewage treatment application in Siverek. WABAG is one of the world’s leading
suppliers and installers of water and wastewater treatment plants and the Siverek plant provides sewage treatment to residents throughout a region of south eastern Turkey. At the plant, sewage sludge is treated in an anaerobic digester to breakdown the biodegradable material and produce methane gas. Once captured, the gas is used to power the plant, significantly reducing overall operational energy costs and improving site efficiencies. In addition, any additional supply of this renewable, green power can be fed into the local grid to provide wider benefit to the local community. HRS says that its DTI heat
exchangers are suitable for heating sludge in anaerobic digesters as the corrugated tubes provide an internal tube profile that inhibits fouling tendencies and increases the rate of
heat transfer. Fouling or snagging of waste particles is prevented by having no change in cross-sectional area along the length of the heat exchanger and the increased turbulence from the corrugation improves heat transfer efficiency. This increased efficiency results in a shorter length to meet the required thermal duty offering a more compact and effective design with a smaller footprint. The two DTI heat exchangers
installed by WABAG are mounted on a common stainless steel clad frame and are used for digester heating. Both are thermally insulated. WABAG senior mechanical engineer
Ersin Sagir explained the thinking behind the new technology: “WABAG is committed to investigating ways of increasing the efficiency of our installations and effectively reducing the carbon footprint of our customers. The new heat exchangers from HRS will help towards ensuring we optimise the Siverek plant efficiency.” In a separate development, HRS Heat Exchangers has a launched new
Fig. 1. Luvata has doubled the manufacturing space at its heat exchanger facility in Juarez, Mexico.
www.engineerlive.com 7
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68