This page contains a Flash digital edition of a book.
SYSTEMS S2 SYSTEMS


When you need an easy-to-use measurement system for accurately and precisely determining spring rates,


spring constants, spring lengths and other spring


characteristics, Starrett S2 systems are the solution. S2 systems are ideal for high- volume production testing, quality control including incoming inspection verification and validation, and research and design engineering.


S2 systems may be used for compression and extension springs with load ratings up to 11,000 lbf (50 kN, 5000 kgf). Our simple, fill-in-the-blank test setups let you test and validate your springs in as few as three steps allowing your testing to be performed in seconds. And your test results can be viewed, graphed and reported, including the ability to export results or raw data at rates up to 1000Hz.


TEST SETUP OPTIONS Pre-Test Options


• Units of Measurement • User Prompts to assist operator during testing • Spring preconditioning (Scrag and Load Set Hold for duration)


Test Options


• Measure Free Length • One Point Limit Test (Load or Height) • Two Point Limit Test (Load and/or Height) • Exceptions (Abort test if an exception is met)


Data Options


• Spring Constant (One Point) • Spring Rate (Two Point) • Date, User, Limit Setpoints Post-Test Options


• Export Raw Data to a file location (up to 1000 samples/second) • Export Results (Overwrite or Append data file)


Test Methods


• Spring Constant • Spring Rate • Initial Tension • Free Length • Load @ Height/Lengths • Single Point • Two Point • Multiple Points • Height/Length @ Loads • Scragging and Load Hold Set


S2 systems can use any FMS, FMD, MMS or MMD test frame. Shown is an S2 system using an FMS-5000 test frame.


22


SYSTEMS


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48