This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Side Minder®. Adjustable lateral support for moderate to aggressive leaners. Up and down, in and out adjustments in seconds, with toggle lever. Easily expands to fit any width of chair—from 16” to 24”. Simply open the quick release on the telescoping center bar, slide lateral supports to fit the chair and tighten. All-steel con- struction. 5524-98 Standard 5524-99 Contoured 5626-53 Extension Plate for Reclining Wheelchairs
Wheelchair Headrest. Moldable contoured headrest with mounting assembly can be used with SideMinder® on any size wheelchair 16” to 24”. Height and depth adjustable. A510-15-3
Headrest Mounting Support. Required to mount headrest when there is no need for lateral support. Expands to fit 16” to 24” wide wheelchairs. 5525-00
Closed with contour pad
Open with contour pad
Laterals down
Laterals up
Lacura™ Headrest Support. Attaches to backrest with an easy-release buckle. Removable, machine-washable cover. A510-07-5 3” deep A510-07-4 4” deep
NEW Hardware
NEW Removal
A510-15-3 5525-00
Head Support. Attaches to highbacked wheel- chairs of any width with straps. Padded; adjusts to fit the head. Wipe clean vinyl upholstery covers resilient foam and sturdy 3 151 81
/4 /2”L x 71 /2 6016 Closed Cell /2 ” plywood. Back is ”W. Supports are 5”D x 4”W x ”H. Straps are 14”L. Latex free.
A507-10-2 A507-10-0
Sammons Preston® Wheelchair Side Support. Closed-cell foam support can be modified with an electric knife. Fits either left or right; on both sides or individually. Optional torso support of open-cell foam fastens to side support with hook-and-loop material. Sold individually.
(Original design courtesy of Lynn
Swedberg, OTR.) A507-10-0 Wheelchair Side Support
A507-10-2 Short Torso Support Insert—6” (15cm) long A507-64 Long Torso Support Insert—9” (23cm) long
Open Cell
Sammons Preston® Open-Cell Carve-It™ Foam. Create your own custom-fit foam supports. Firm-density foam is fire retardant. A387-00-1 Open Cell 5” x 16” x 16” A387-00-2 Open Cell 7” x 23” x 23” A387-00-3
Open Cell 14” x 23” x 23” A507-63 Closed Cell 24” x 36” x 2” 991