This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Rolyan® TailorSplint™. Adapts effectively to a wide range of ap- plications, from hand splints to larger orthoses • Perfect balance between drap- ability and resistance to stretch
• Suitable for the novice and ex- perienced splinter
• Non-stick coating • Edges trim easily
1/16” x 12” x 18” (1.6mm x 31cm x 46cm)
Single Sheet 1% Perforation Solid 5534-59 – –
5534-58 – –
1/16” x 12” x 18” (1.6mm x 31cm x 46cm)
Case of 4 Sheets 1% Perforation Solid A297-00-4 – –
1/8” x 18” x 24” (3.2mm x 46cm x 61cm)
1% Perforation 19% OptiPerf™ Solid A297-00-6
0815-11-294 0815-11-393
5604-90 –
0815-85-538
1/8” x 18” x 24” (3.2mm x 46cm x 61cm)
A297-00-3 A297-00-2 – –
1/8” x 12” x 18” (3.2mm x 30cm x 46cm) Single Sheet Solid
5644-33-23 Beige
1% Perforation 19% OptiPerf™ Solid 5604-91
0815-11-351 –
1/8” x 24” x 36” (3.2mm x 61 x 91cm) Single Sheet
1% Perforation A297-01-2
1/8” x 9” x 12” 5514-56-02 Light Blue A297-00-1 0815-11-369 0815-11-401 0815-85-553 0815-11-377
(3.2mm x 23cm x 46cm) (3.2mm x 23cm x 46cm) Single Sheet Solid
1/8” x 9” x 18” Single Sheet 5514-56-03
A297-00-5
0815-11-286 0815-11-385
For TailorSplint with IMPRINTS, please see page 453.
3/32” x 18” x 24” (2.4mm x 46cm x 61cm)
1% Perforation Solid A297-00-8
0815-11-328 0815-11-443
A297-00-7
0815-11-302 0815-11-427
3/32” x 18” x 24” (2.4mm x 46cm x 61cm)
1% Perforation Solid A297-01-1
A297-01-0
0815-11-336 0815-11-344 0815-11-450 0815-11-435
3/32” x 12” x 18” (2.4mm x 30cm x 46cm) Single Sheet
1% Perforation 5644-33-22
Charcoal
TailorSplint™
Temperature Time
1 ” (1.6mm) 150° to 160° F (65° to 70°C) water for 30 seconds ⁄32
⁄16
3 ” (2.4mm) 150° to 160° F (65° to 70°C) water for 30 to 45 seconds ⁄8
1 ” (3.2mm) 150° to 160° F (65° to 70°C) water for 1 minute
1 ” (1.6mm) 1 minute of working time⁄16 ⁄32
3 ” (2.4mm) 2 to 3 minutes of working time 1 ” (3.2mm) 3 to 5 minutes of working time⁄8
& TailorSplint™
AM
Splinting
Rolyan® TailorSplint™ with Anti-Microbial Coating. Rolyan’s anti-microbial formu- lation increases the life span of the splint. The anti-microbial protection helps to prevent odors and coating wear that can be caused by harmful microorganisms. This protection won’t wash or wear off. Splints remain odor free longer with this revolutionary formulation, leading to better user compliance. The anti-microbial component also makes the material slightly more resistant to stretch, reduces the surface tack while warm and increases the gloss of the finished splint. Beige.