BOBCAT TELEHANDLER SUCCESS STORY 47
THREE GENERATIONS OF FARMING, ONE BRAND OF COMPACT EQUIPMENT
Wisconsin dairy farm combines Bobcat telescopic tool carrier with a loader for an effi cient compact equipment team
Third-generation dairy farmer Stan DeBoer and his wife, Faye, live on the homestead where Stan’s grandfather settled in 1932. Since 1979, Bobcat has been the preferred brand of compact equipment for day-to- day operations at DeBoer Farm, based in Randolph, Wis. Today, a VersaHandler®
complements a Bobcat®
telescopic tool carrier skid-steer
loader to effi ciently complete chores.
For the past three years, DeBoer has operated a V417 to assist with tasks that require more lift height and reach than his Bobcat skid-steer loader. DeBoer says the 75-horsepower V417 is an integral part of properly fi lling his mixer with the total mix ration (TMR) to feed his 200-plus dairy cow herd. With feed in the Bobcat 84-inch light-material bucket, DeBoer extends the telescopic tool carrier’s two-stage boom to reach over the top of the mixer, which he estimates to be about 8 feet, 9 inches tall. A single joystick inside the V417 controls the lift and tilt functions, while a thumbwheel on the joystick extends the boom. “I can extend the boom to easily dump feed into the mixer, while monitoring a scale to make sure I’m being precise,” he says. “Feed is the most expensive cost in my operation, and with the V417, it’s easier to be accurate when I’m loading the mixer. I can mix four loads of feed in an hour and a half.”
The Bobcat V417 replaced a different brand of telehandler, according to DeBoer, and he says it is a productive machine, particularly when he is unloading bales or palletized materials from a truck. “I can unload a semi
Back row: Stan and Faye DeBoer. Front row, pictured left to right: Leanna Dykstra, Matt Dykstra, Owen Navis, Jake Dykstra, Avery Navis and Louis DeBoer. Not pictured are grandchildren: Chastin DeBoer and Evie Stiteley.
load of hay bales in about 20 minutes, which saves me a lot of time,” DeBoer says.
35 YEARS OF BOBCAT EQUIPMENT
Both the V417 and his Bobcat skid-steer loader were purchased from Mid-State Equipment, the local Bobcat dealer. DeBoer says the service from Mid-State Equipment has been excellent. His relationship with Bobcat equipment dates back to the farm’s fi rst Bobcat loader, an M610 purchased in 1979. Following that fi rst machine, the family purchased a 763 that DeBoer says easily had more than 10,000 hours on it when he upgraded to a newer loader in 2004. Prior to purchasing Bobcat compact equipment, DeBoer says the family
operated a tractor with front-end loader, and before that, it was manual labor with a pitchfork. “Compact equipment, particularly from Bobcat, has come a long way since our fi rst M610,” DeBoer says. “Today’s equipment is more durable, easier to steer and very maneuverable.”
DeBoer’s V417 has three steering modes — front-wheel, all-wheel and crab — to best match the operating conditions. The all-wheel steer mode is particularly helpful on the farm, DeBoer says, because it allows for a tight turning radius.
Visit
www.MyWorksaver.com/V417 to learn more about the V417, including approved attachments, product specifi cations and options to customize the machine.
COMPACT EQUIPMENT, PARTICULARLY FROM BOBCAT, HAS COME A LONG WAY SINCE OUR FIRST M610. TODAY’S EQUIPMENT IS
MORE DURABLE, EASIER TO STEER AND VERY MANEUVERABLE. — STAN DEBOER, DEBOER FARM
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60