2014 WORKSAVER BOBCATALOG
41
TILT-TATCH™
ACCESSORY
› Rotates attachments 15 degrees left or right from center
› Valuable for handling pallets of materials, digging with corner of bucket, cutting level paths on hillsides, keeping load level on uneven terrain
› Mounts between Bob-Tach® and attachment
COMPATIBLE WITH CTL SSL TC
system
TREE FORK › Grab, lift and transport balled and burlapped trees
› Hydraulic arm opens and closes to grasp and hold objects against a rigid second arm
› Not approved for medium- or large- frame loaders
COMPATIBLE WITH CTL MTL SSL
TREE SPADE › Dig, transport and load trees fast and effi ciently
› Compact, short tower design is perfect for working between closely planted trees
› Five sizes, three spade confi gurations: cone, modifi ed and truncated blades
COMPATIBLE WITH CTL SSL
TRENCH COMPACTOR › Finish any trenching job with the wheel-type compactor
› For trenches 4 to 12 in. wide and up to 4 ft. deep
› Built-in fl ow regulator to ensure proper rpm
COMPATIBLE WITH CTL SSL
TRENCHER › Nine models dig from 2 to 5 ft. deep › Trench widths: 4 to 12 in. › Manual or hydraulic side-shift available to work close to a building or object
VIBRATORY PLOW › Install fl exible pipe and cable with minimal ground disturbance
› Narrow, knife-like slit, 6 to 18 in. below the surface
› Pulls up to 1.5-in.-diameter pipe, cable or wire
COMPATIBLE WITH CTL MTL MX SSL TC TH
COMPATIBLE WITH MTL
VIBRATORY ROLLER › Three widths: 48, 73 and 80 in. › Smooth and padded drums available (80-in. model is smooth only)
› Compacts both forward and reverse; water kit available to minimize dust
COMPATIBLE WITH CTL SSL
WATER KIT › Helps reduce dust and debris on attachments such as an angle broom, sweeper, planer or vibratory roller
› Two to four spray nozzles evenly distribute water
› High-capacity water tanks minimize need for frequent refi lling
COMPATIBLE WITH CTL SSL TC
COMPATIBLE WITH CTL SSL
WHEEL SAW › Cuts through asphalt, concrete, frozen ground and wire mesh
› Two models: 18- or 24-in. maximum dig depths
› Wheel widths: 3, 6 and 8 in.
Visit
www.MyWorkSaver.com/SSL/att for more information about Bobcat attachments for loaders.
SSL SKID-STEER LOADER
TC TOOLCAT UTILITY WORK MACHINE
TH TELEHANDLER
UTV UTILITY VEHICLE
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60