This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Must contain the following elements in any order LIFTS Maximum of two
• One must be from Group 3 or Group 4 • Full extension of lifting arm(s) required
• Minimum of one and maximum of 3½ revolutions by the man • Only one lift may include a carry feature
TWIST LIFT
THROW JUMPS SOLO JUMP
JUMP
COMBINATION/ SEQUENCE
SOLO SPIN COMBINATION
PAIR SPIN COMBINATION
DEATH SPIRAL Maximum of one • No limit to number of revolutions
• Must be different Maximum of one
• Carry lifts (one-half rotation exit/entry) are permitted and are not counted in the number of overhead lifts
• Take-off may be toe loop, flip, Lutz or Axel Maximum of two
• No limit to the number of revolutions Maximum of one
• Jump combination may consist of two or three jumps • Number of jumps in the jump sequence is unlimited
Maximum of one
• All jumps executed with more than two revolutions (double Axel and all triple and quadruple jumps) must be of a different nature (different name); however, the jump combination or sequence can include two same such jumps
• Must be solo spin combination • Minimum of 10 revolutions total
Maximum of one • Must be pair spin combination Maximum of one
• Change of foot is optional, but if change of foot is performed, there must be three revolutions before and after the change of foot
• Must have at least one change of foot and one change of position by each partner, not necessarily at the same time, and there must be three revolutions before and after the change of foot • Minimum of eight revolutions total
• When death spiral position is attained, both partners must execute one revolution with man in full pivot position
• Lady’s head must reach the level of her skating knee • Variations of arm holds and pivot positions possible
CHOREOGRAPHIC SEQUENCE
REMARKS Maximum of one • Must fully utilize the ice surface
• Unless otherwise stated, all elements must meet the general criteria and basic requirements in order to be counted (see rule 5100).