www.stahlspecialty.com
The Stahl Tilt Pour Casting Process for Aluminum was invented by Glenn Stahl at Stahl Specialty in 1946. Today, Stahl utilizes this process to provide some of the largest, high integrity, aluminum castings in the industry. If you need a pressure tight or mechanically sound aluminum casting delivered heat treated and fully machined, come to Stahl, conveniently located in the Heart of America.
■ One of the largest permanent mold aluminum foundries in the country
■ Unique supplier offering customers a single point of contact for tooling, castings, heat treatment, machining and engineering services
■ Stahl specializes in large, complex, machined castings and can produce parts ranging from 0.5 pounds up to 280 pounds.
■ Stahl is ISO-14001/ISO-9002/TS- 16949 Certified
Watry is one of the most automated, high-tech, permanent mold foundries in the industry. Capabilities extend far beyond your typical permanent mold foundry. As your single source for permanent mold castings, we can reduce your transportation costs and eliminate the headaches that arise in dealing with subcontractors.
■ Castings as small as .28 pounds up to 125 pounds finished weight after machining, but our capabilities allow us to produce much larger castings.
■ Single source supplier from casting design consultation through mold design and build, casting, heat treating, precision machining, powder coating, bar coding and light assembly.
■ Watry Industries is certified to ISO 9001 : 2008
See some of Stahl Specialty’s casting photos here:
p otos e e:
Scan here with your smart phone or go to this link:
http://bit.ly/
stahlcastingsimages
Scan here with your smart phone or go to this link:
http://bit.ly/ watryindustries
Check out our powder coating capabilities overview here:
Take a tour of Premier here:
Scan here with your smart phone or go to this link:
http://bit.ly/ premiertour
Learn more about the V-Process click here with your smart phone:
Learn more ab the V-Process c with your smar
Scan here with your smart phone or go to this link:
http://bit.ly/ v-process
INDUSTRIES, LLC
www.watry.com
www.premieraluminum.com
Serves as a middle niche between low and high volume product requirements. Premier’s broad experience assures customers:
■ Low and medium volume. Specializing in component parts from 1 to 125 pounds.
■ Diverse applications including: cast-in of heating element, stainless & steel inserts, construction products, furniture & pressure tight equipment.
■ Produce high density & high strength castings for applications where medium volume, assembly-ready, fully machined aluminum castings are employed.
■ Machined and assembled complete castings
■ Premier is ISO 9001-2008 certified
www.harmonycastings.com
Castings LLC TPi ARCADE
www.tpicast.com
INC
117,000 total square-foot, computer controlled facilities house state-of-the-art computer controlled equipment run by our manufacturing experts. Compared with a typical sand foundry, we produce finer finishes and cast to tighter and more consistent tolerances. Resulting in an upgrade in quality at a comparable or even lower total cost. Harmony & TPi Arcade provide a multitude of services not always available from other casting suppliers including:
■ Aluminum V-PROCESS manufacturing
■ Zero Degree Draft - which reduces weight and machining
■ Thin Walls - allows wall thickness of 0.125
■ Tight Tolerances - castings approximately twice as accurate as typical sand castings
■ Unlimited Pattern Life - guarantee the pattern will last the life of your product ■ 150 RMS Finish - a considerable advantage
■ Excellent Casting Integrity - With our automated molding line, the casting dimensions are repeatable
■ CNC machining, finishing and subassembly
■ CAD/CAM systems to receive, integrate and generate numerically controlled programs for rapid, accurate patterns and component machining
■ Harmony & TPi are ISO 9001:2008 certified
Within the Ligon Foundry Group, all facets of your aluminum casting needs are met.
Watry/Ligon Insert—Back— MCD&P— Feb 2013 05092013163717
Approved with warnings
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70