Power Management | Advertorials
NEW Orient Power Supplies and DC-DC Converters with up to 4 year warranty from Stadium Power
POWER SUPPLIES provider Stadium Power has launched a new range of competitive and compact AC-DC switch mode power supplies and DC-DC converters with up to 4 year warranty.
The Orient CSF range offers low cost, high reliability enclosed AC-DC power supplies from 15W to 1500W featuring inrush current protection, short circuit protection, over voltage
and over current protection, operating temperature from -10°C to +70°C (D rate above 50°C), DIN rail mounting option, approved to UL, C-UL, CB and CE and comes with 2 year warranty.
The PSF range offers compact, high reliability AC-DC power supplies from 50W to 600W with power factor correction, short circuit protection, over voltage and over current protection and operating temperature from -10°C to +70°C (D rate above 50°C). DIN rail mounting versions over 150W. Meets EN55022 Class B, is approved to UL, C-UL, CB and CE and offers 4 year warranty.
The Orient DS range of DC-DC converters offers output DC voltages of 5V, 12V, 24V and 48V with input voltage ranges from 12V to 110V nominal. Offering input polarity protection, over voltage protection and over current protection, isolated output at 50W and 100W and operating temperature of -10°C to +50°C with 2 year warranty.
Stadium is also launching a new range of single phase and 3 phase high attenuation EMC Filters from the Orient portfolio.
Stadium Power Tel: 01635 644233
www.stadium-power.co.uk
Z+ Series now includes 200W models
Offering the same flexibility and advanced features as the Z+400 range of programmable DC power supplies, the lower power Z+200 range addresses the need for high quality bench-top power for the R&D environment.
• 200W and 400W models, rack or bench mount • Only 2U high and 70mm wide (6 units per 19” rack) • USB, RS232, RS485, analogue control and monitoring • LAN, GPIB and isolated analogue interface options • 16 bit resolution and fast programming response • Built in arbitrary function generation and storage • User programmable output signal pins • 5 year warranty
CONTACT US TODAY TO ARRANGE YOUR FREE EVALUATION TRIAL!
For more information:
www.uk.tdk-lambda.com/zplus +44 (0) 1271 856666
Wall-Mount UPS Units from Powersolve Have Very Long Back-Up Capability
• Pure Sine Wave Output • 800VA to 4000VA • Wide AC Input Range
The WM Series of uninterruptible power supplies announced by Powersolve are wall-mount units designed to provide back-up power for long periods. Rated from 800VA/600W to 4000VA/3000W, the WM Series accepts a very wide AC input range while providing a pure sine wave output for up to several hours or more.
These are line interactive UPS systems with a 3ms transfer time. They are both generator compatible and cold start capable and feature adjustable voltage transfer points and charging voltage.
According to Powersolve’s Managing Director Peter Clark, WM Series units combine high power chargers with smart battery management enabling them to charge high capacity external lead acid batteries (up to 500AH) for longer hold-up times. The units provide adjustable charging currents for different batteries as well as intelligent, two-stage charge control. Powersolve can also provide units with an optional solar charger input.
The WM Series accepts a wide AC input voltage range of 140 to 310VAC for 230V models and 70 to 155VAC for the 115V version. Models in the WM Series are rated from 800VA/600W to 4000VA/3000W (230VAC output) and up to 3200VA/2400W (115VAC output). DC to AC isolation is standard.
All models are protected against over current and over charging and incorporate CPU controlled thermal protection. Every unit has a thermally controlled cooling fan. Smart monitoring and warning for battery failure or open circuit battery is included and a fully functional LED or LCD display provides users with visual systems information. Audible status alarms are also built-in. Powersolve can also supply WM Series units with a variety of communications and remote management interface options.
More about Powersolve at
www.powersolve.co.uk
perform both analogue-plus-decodes Analysing today’s electronic systems and interfaces demands lowest-noise measurement as well as serial-data amidst interfering noise. RIGOL ground-breaking DS2000s all perform 500uV/cm analogue plus advanced digital trigger functions, with connectivity for convenient LAN, USB-to- stick/PC screen grabbing. RIGOL DS2000 has powerful triggers and decodes with innovative screen display.
Award-winning RIGOL has released DS2202 (200MHz), DS2102 and DS2072 oscilloscopes, with low-noise analogue plus digital-decoding able to handle more demanding applications: 16 triggers come standard, optional serial, SPI and I2C-bus decodes to a generous 8” screen (pictured). Uncompromising specifications from front-end onwards mean DS2000s capture smaller signals linearly; analyse longer streams of data (56Mpts option); deliver exceptional t-axis resolution, even at 50,000 waveforms/s.
Telonic Instruments is a ISO9001 registered company with UK support and stock offering reliable programmable PSUs, arbitrary waveform generators and power testers plus UK warranty.
In action: DS2000 superior triggers; innovative decode displays
TELONIC INSTRUMENTS LTD Toutley Industrial Estate, Wokingham, Berkshire, RG41 1QN Tel: +44 (0) 118 9786911 | Fax: +44 (0) 118 9792338 | Web:
www.telonic.co.uk
COTS or Custom Power Supply?
It has become fashionable to believe that building a power supply using standard COTS items is easier, cheaper and more reliable. Sometimes it is true but in many applications custom units have substantial benefits. Being able to offer both standard types and a full custom design service Roband is uniquely placed to offer the optimum.
Established in 1956 Roband is an independent British power supply company specialising in the design, development and manufacture of electronic power supplies predominately for the defence and aerospace markets. Being virtually self sufficient, risk, cost and time scales are minimised.
With such unrivalled longevity and a reputation for quality and service, Roband will assist you from design conception, supplying development and production hardware right through the whole life of your programme.
New RIGOL DS2000-series 2GS/s oscilloscopes
Roband Electronics plc, Charlwood Works, Charlwood, Horley, Surrey, England, RH6 0BU
Situated a few minutes from London Gatwick airport T: +44 01293 843000 F: +44 01293 843001 E:
postmaster@roband.co.uk
Ideal Power 27AB Series High Efficiency DC/DC
Converter Family Based on the Industry Standard 2” x 1” Package and Pin Out this High Efficiency Converter provides 4 different Output Voltages at up to 40W/10A from either a 2:1 or 4:1 DC Input Voltage range. Meeting latest ROHS-6 requirements and utilising a Patented “Coupled Inductor SR” Topology, the low profile six sided metal enclosed converter has an operating temperature of -40C to +110C. Internal heat-spots are eliminated using Patented military grade silicone potting.
Applications
These units are ideally suited for telecom, instrumentation, industrial, data processing and networking applications including ‘bus’ converter applications.
All models are available from stock (positive enable) Other models and variations are available. Please contact Ideal Power Ltd with your enquiry.
Ideal Power Ltd
Email:
colin@idealpower.co.uk Tel: 0845 260 3400
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44