PRODUCTS & SERVICES Telephone: 020 7880 7614 Email:
Patrick.Lynn@
redactive.co.uk
Waterloo supplies air distribution for leisure centre Scunthorpe’s award-winning leisure centre is benefiting from excellent thermal distribution, thanks to air distribution products supplied by Waterloo Air Products. Built by main contractors Bowmer & Kirkland, the ‘pods’ are constructed from glass and steel using an unusual design that features five intersecting geodesic domes covered in natural materials. Waterloo’s Aircell polymer grilles and aluminium louvred-faced diffusers were specified throughout to deliver a well-designed air distribution system that combined the needs for aesthetic requirements with energy- efficient air movement. l For more information, call 01622 717861 or visit
www.waterloo.co.uk
New product catalogue for all metering needs published by MWA Technology Independent meter specialist MWA Technology, based in Birmingham, has launched a new 52-page product catalogue featuring a wide range of its metering and associated products. The handy A5-sized publication has been designed to assist with the correct specification and selection of equipment for all metering needs. Divided into 14 sections, products are depicted alongside, descriptions, features, model range and other vital information. Copies of the free brochure can be obtained from MWA Technology. l For more information, call 0121 327 7771 or visit
www.mwatechnology.com
Solatube launches Energy Care Optima range delivering exceptional thermal performance The Solatube Energy Care Optima range meets the strict criteria set for Passivhaus construction and is available as an upgrade for the Solatube Brighten Up series. Independent tests show the Solatube Energy Care Optima range now meets the stringent criteria set by Passivhaus standards, with outstanding U-values. Independent testing was carried out to BS EN ISO 12567-1 2000 for windows and doors. The Solatube 160 DS Energy Care Optima produced a U-value of 0.5W/m²/K. l For more information call 01234 241466 or visit
www.solatube.co.uk
iVector commercial outputs without compromising style Myson has recently launched iVector, the first in a new generation of intelligent fan convector products. Outputs range from 2 KW to 10 kW in compact sizes between 800 mm and 1,600 mm, all with a standard height of 600 mm. Sound levels as low as 24 dBA make iVector silent when operating at normal fan speeds. iVector is an excellent choice for traditional boilers and renewable systems with low water temperatures. The solid one-piece casing has a decorative design as standard on all models, bringing a domestic look to the commercial arena. l For more information visit
www.myson.co.uk or email
ivector@myson.co.uk
Danlers top energy-saver now available pre-wired
Danlers best-selling ceiling flush-mounted passive infra-red occupancy switch is now available pre-wired with three and four pole connectors to suit most leading modular wiring systems. This cost-effective, reliable automatic lighting control is available with connectors for Wieland, Metway, Flex Connectors, Wago, Modular Wiring, Ensto, and Apex systems, saving not only on energy but also on installation costs. Danlers is offering the standard 230 volt mains supply model alongside low voltage versions (12 V or 24 V) and
versions with volt- free contacts. l For more information call 01249 443377 or visit www.
danlers.co.uk
70 CIBSE Journal September 2012
Modupak multi-boiler package The new R40 wall-mounted boiler from Stokvis Energy Systems incorporates the latest gas heating technology providing maximum efficiencies and minimum environmental impact. With five models ranging from 65 kW to 145 kW, all small commercial requirements can be accommodated, along with larger commercial properties when modules are combined to form the ‘Modupak’. The Modupak is a frame-mounted combination of up to eight boiler modules in a back-to-back configuration, or up to six boiler modules as an in-line formation. l For more information, call 020 8733 3050 or visit
www.stokvisboilers.com
Polypipe Terrain selected for exhibition Above ground drainage products from Polypipe Terrain feature in a new exhibition celebrating plastics’ contribution to sporting achievement and the part they have played in London 2012’s sustainability agenda. Now open to visitors, the Plastics for Gold Exhibition at the Museum of Design in Plastics (MoDiP) is part of the Cultural Olympiad and has been awarded the London 2012 Inspire Mark. It runs until 20 November 2012. Polypipe Terrain’s Hydromax Siphonic roof drainage system and FUZE Gravity Drainage for soil and waste management feature in the display. l For more information visit
www.modip.ac.uk/exhibitions/gold
www.cibsejournal.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80