12-04 :: April/May 2012


nanotimes News in Brief


plasmon resonance scattering light that is captured by a dark-field microscope (DFM). The RGB (three primary colors, red, green, and blue) chrominance information from the dark-field image can be directly converted into the diameters of the GNPs using the relationship between the particle size and the scattering light peak wavelength. © Analytical Che- mistry


Chao Jing, Zhen Gu, Yi-Lun Ying, Da-Wei Li, Lei Zhang, and Yi-Tao Long: Chrominance to Dimension: A Real- Time Method for Measuring the Size of Single Gold Nanoparticles, In: Analytical Chemistry ASAP, April 14, 2012, DOI: 10.1021/ac203118g: http://dx.doi.org/10.1021/ac203118g


59


© University of Texas at Austin / R.S. Ruoff research team


Hengxing Ji, Lili Zhang, Michael T. Pettes, Huifeng Li, Shanshan Chen, Li Shi, Richard Piner, and Rodney S. Ruoff: Ultrathin Graphite Foam: A Three-Dimensional Conductive Network for Battery Electrodes, In: Nano Let- ters ASAP, April 23, 2012, DOI:10.1021/nl300528p: http://dx.doi.org/10.1021/nl300528p


Researchers at Department of Mechanical Engi- neering and the Materials Science and Enginee- ring Program, The University of Texas at Austin (US), report in Nano Letters the use of free-stan- ding, lightweight, and highly conductive ultrathin graphite foam (UGF), loaded with lithium iron phosphate (LFP), as a cathode in a lithium ion bat- tery. At a high charge/discharge current density of 1280 mA g–1


on UGF was 70 mAh g–1


, the specific capacity of the LFP loaded , while LFP loaded on Al


foil failed. Accounting for the total mass of the elec- trode, the maximum specific capacity of the UGF/ LFP cathode was 23% higher than that of the Al/ LFP cathode and 170% higher than that of the Ni- foam/LFP cathode. Using UGF, both a higher rate capability and specific capacity can be achieved simultaneously. Moreover, UGF presents excellent electrochemical stability comparing to that of Al and Ni foils. © Nano Letters


Researchers at University of California, USA, University of Bremen, Germany, and Universi- tat Rovira i Virgili, Spain, have developed a novel screening technology that allows large batches of metal-oxide nanomaterials to be assessed quickly, based on their ability to trigger certain bio-logical responses in cells as a result of their semiconduc- tor properties. In a key finding, the research team predicted that metal-oxide nanomaterials and electronically active molecules in the body must have similar electron energy levels – called band- gap energy in the case of the nanomaterial – for this hazardous electron transfer to occur and oxidative damage to result.


Based on this prediction, the researchers screened 24 metal-oxide nanoparticles to determine which were most likely to lead to toxicity under real-life


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85