Bobcat


MATCH HYDRAULIC FLOW TO BOBCAT ATTACHMENTS FOR OPTIMUM CONTROL


Auxiliary fl ow settings: Low fl ow


AUX 1 Best for using the Power Tilt® AUX 3 2 1


A new selectable auxiliary hydraulic fl ow control for Bobcat®


excavators


gives operators more control of select attachments for improved movements, particularly when precision matters most. Toggle among three auxiliary fl ow settings to best match the attachment. Simply press the AUX mode button repeatedly to choose the desired auxiliary fl ow. Selectable fl ow is standard on models E32, E35, E42, E45, E50 and E55.


and


Hydra-Tilt™ swing accessories because the moving parts of the attachment move slowly. Trenches can be dug with accurate angles.


AUX 2 Medium fl ow


Well-suited for using clamps for precise movements to place boulders or timbers. Operators have more predictable responses when handling landscaping materials.


AUX 3 Maximum fl ow


Ideal for using hydraulic breakers, plate compactors or augers. Attachments perform at their optimal setting.


utility vehicles


upgrade operator comforts


Coming this fall, there will be three signifi cant changes to Bobcat®


utility


vehicles. Electronic power steering is now standard equipment on 3400, 3400XL and 3450 diesel deluxe models; adding tilt steering on all models; and an optional dealer- installed kit to increase the top speed to 35 miles per hour.


Electronic power steering


Electronic power steering gives you better maneuverability in close turns at low speeds and helps reduce operator fatigue. This is especially true with the 3450 model when it’s equipped with a front-mounted attachment and carrying up to 500 pounds. It simply requires less effort to make turns.


E26 QUICK SPECS


Tail Swing: Minimal (0.8 inches of overhang)


Horsepower: 27 hp (20,1 kW)


Weight: 5660 lb. (2570 kg) standard; 6091 lb. (2763 kg) long-arm opti on*


Dig depth: 8 ft . 6 in. (2,5 m) standard; 9 ft . 6 in. (2,8 m) long-arm opti on


Reach at ground level: 15 ft . 4 in. (4,6 m) standard; 15 ft . 11 in. (4,8 m) long-arm opti on


Dump height: 9 ft . 10 in. (3 m) standard; 10 ft . 6 in. (3,2 m) long-arm opti on


Width (blade): 60 in. (1515 mm)


Travel speeds (low and high): 1.5 mph (2.4 km/hr) and 2.8 mph (4.5 km/hr)


* With counterweight


X-Change™ att achment mounti ng system: standard


Auxiliary hydraulics with quick couplers: standard


Auxiliary fl ow: 12.5 gpm (47,2 L/min) Second auxiliary hydraulics: opti onal Auto-idle thrott le Auto-shift travel system Keyless start system: opti onal Fuel fi ll alert


Choose from 12 diff erent Bobcat att achments


Tilt steering


If you frequently get on and off your utility vehicle, the tilt steering will make it easier for you with better access to the operator’s seat, and it provides more operator comfort.


35 mph top speed


Lastly, if you want to increase your Bobcat utility vehicle’s top speed, a new kit will allow you to raise it from 30 to 35 mph. Note: This excludes the 3200 gas model. This kit applies to utility vehicles manufactured after August 15, 2011.


Watch our UTVs in action!


To see a narrated walkaround tour of our versatile Bobcat utility vehicles, scan this QR code with your smartphone (QR code reader app required).


If you don’t have a smartphone, visit www.MyWorkSaver.com/qr/UTV to watch the video.


FALL 2011 | WorkSaver 7


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32