This page contains a Flash digital edition of a book.
Materials • Processes • Finishes


4 Rolling element bearings have a significant impact on the energy-efficiency of most mechanisms, yet they have their limitations in terms of load capacity, speed and longevity. Jon Severn reports on recent developments that could lead to major advances in bearing steels.


4 Les roulements mécaniques ont un impact significatif sur l’efficacité énergétique de nombreux mécanismes, mais ils présentent cependant certaines limites en termes de capacité de charge, de vitesse et de longévité. Jon Severn revient sur certains développements récents qui pourraient entraîner des avancées majeures dans le domaine de l’acier à coussinets.


4 Wälzlager haben eine signifikanten Einfluss auf die Energie-Effizienz der meisten Mechanismen, dennoch gibt es


Einschränkungen hinsichtlich ihrer Tragfähigkeit, Geschwindigkeit und Langlebigkeit. Jon Severn berichtet über die jüngsten Entwicklungen, die zu wichtigen Fortschritten bei Wälzlagern führen könnten


Researchers make breakthroughs in rolling element bearing steels


R


olling element bearings are today found in a wide variety of products, from cars and aero engines to electric motors and bicycles. Often viewed as commodity components, rolling


element bearings are generally taken for granted - unless they fail prematurely due to incorrect specification, installation, lubrication or sealing, or because a user is sold a counterfeit product of very substandard quality. Bearing technology is relatively mature,


Fig. 1. SKF’s E2 double-row, angular-contact ball bearings benefit from a reduction in frictional moment of, in some cases, over 50 per cent.


having evolved since, some say, Roman times, and then been developed more rigorously in the last hundred years or so. Nevertheless, manufacturers are continually seeking to improve their designs in order to stay one step ahead of their competitors. Drivers for product developments include higher speed and/or load capacity, longer life and reduced friction, with this latter factor being of particular interest to those designers seeking to improve the energy-efficiency of their products. The leading manufacturers of bearings are certainly adept at improving their bearing designs. For example, SKF recently introduced the E2 range of energy-efficient bearings. The first E2 products launched in 2009 were single-row, deep-groove ball bearings for applications with light and normal loads. These benefit from features such as an optimised internal geometry, a new polymer cage and a low-friction grease; the result is that frictional moment is improved by 30 per cent or more compared with the company’s already efficient standard bearings, plus the cooler running extends both grease life and relubrication intervals to reduce maintenance costs. Another product added to the


E2 family in June 2011 is the double-row, angular- contact ball bearings (DRACBB) that deliver the same improvement in frictional moment, though in some cases the reduction can be 50 per cent or more (Fig. 1). However, SKF is not content with making this


level of progress, even though an improvement in the order of 30 to 50 per cent in a particular characteristic is a substantial advance. For product innovation, SKF focuses on seven


core technologies: steel and heat treatment; non- metallic materials; sensorisation (combining sensors with bearings); tribology; modelling and simulation; lubrication; and sealing. Of course, there is some overlap between


these, so the research and development teams are encouraged to liaise with each other. In addition, sustainability and the environment are taken into account across all areas.


University research


As with rolling element bearings, the alloying of steel and its subsequent heat treatment might be considered mature technologies, with little scope for major developments. However, recent advances in computer-based modelling and simulation, in conjunction with electron microscopy, is enabling new steels to be developed with characteristics that are tailored to suit specific applications. One of the


world’s leading research centres is the Department of Materials Science & Metallurgy at the University of Cambridge, and this has formed a strategic partnership with SKF in create the SKF University Technology Centre (UTC) for Steels.


SKF has also established UTCs with: Tsinghua, Beijing, for non-metallic materials


and sealing; Imperial College, London, for tribology and modelling and


www.engineerlive.com 31


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68