Announcing… An All–New Conference on Heavy Section Ductile Iron for Casting Producers, Suppliers, OEM’S and Design Engineers!
THE DUCTILE IRON SOCIETY’S
2010 HEAVY SECTION DUCTILE IRON CONFERENCE October 27-29 • Marriott Cleveland Downtown at Key Center • Cleveland, Ohio
Join us for this fi rst-ever HEAVY SECTION DI Conference. More than 20 presentations are featured:
Dr. Sven Uebrick Tecpro Europe (Germany) “Wind Energy Castings-Metallurgical Challenge” Kevin Till
Clipper Windpower Technology (USA) “The Use of Large Ductile Iron Castings in Wind Turbine Generators”
Torbjorn Skaland Vestas Castings Group (Norway) “Heavy Ductile Iron Castings for Wind Turbines” Ian Lee
Graham Campbell Ferrum International (Australia) “Heat Treatment of Heavy Section Ductile Iron Castings”
Peter Graham
Graham Campbell Ferrum International (Australia) “Solution Strengthened Ductile Iron in Heavy Sections”
Chantal Labrecque Rio Tinto (USA) “The Effect of Nodule and Particle Counts on the Low Temperature Impact Strength of a Heavy Section Ductile Iron Casting”
Rick Gundlach Junyoung Park
Stork Climax Research (USA) “Effect of Surface Defects on Fatigue Properties of Ferritic Ductile Iron”
General Electric Energy – Gas Turbine Technology Center (USA) “Challenges in Heavy Section Power Generation Iron Castings”
Vytas Svalbonas Metso Minerals (USA) “Evaluation Methods for Flaws in Heavy Ductile Iron Sections, in Mining”
Henrik Barth Eli David Stephen Miller NovaCast USA Inc. (USA) “Tight Process Control Essential for Tough Requirements”
Thorsten Reuther Hofmann Ceramics (Germany) “How to Filter a Heavy Section Casting, the Do’s and Don’ts”
Globe Metallurgical (USA) “Solidifi cation Shrinkage of Cast Irons – A Comprehensive Review”
Ferrosource Div. of Stemcor (USA) “Sourcing Options for Ductile Grade Ferrous Charge Materials”
Bill LaFramboise Auburn Analytical Labs, Inc. (USA) “Slag Baseline-What are the benefi ts” Dirk Howe Jim Garrett
Siempel Kamp – Europe “Heavy Section Casting Producer” Gregory Selip
Blastman Robotics Ltd. /FS&D “Heavy Casting Automated Cleaning and Finishing” Ellwood Engineered Castings (USA) “Energy Conservation Projects”
John McGoldrick Hodge Foundry (USA) “Understanding Ultrasonic Requirements” Michael Koch
John Keough Bob Henchar
FerroPem (Division of Ferroatlantica) “Inoculation of Heavy Section Castings – The Past and the Future”
Applied Process Inc. – Technologies Div. “Heavy Section Austemper Ductile Iron” X-R-I Testing, Div of X-Ray Industries, Inc. “NDT Inspections – Outsource or In-House”
Doru Stefanescu Ohio State University “The Physics of Microporosity Formation in Ductile Iron”
Ralph Showman Ashland Performance Materials “The Effects of Mold & Core Consumables on Surface Defects”
Bill DeWood Refcotec “Foundry Coatings in the 21st Century” Christof Heisser Magma Foundry Technologies “Simulation of Heavy Section Iron Castings”
If you are interested in attending and registering, please visit the DIS website at
www.ductile.org for more information.
The Ductile Iron Society 15400 Pearl Road • Suite 234 • Strongsville, Ohio 44136 440/665-3686 • Fax 440/878-0070 •
www.ductile.org •
jwood@ductile.org
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62