EXPLORATION/DRILLING/FIELD SERVICES 29
Diamond wire cutters for platform decommissioning
Giuseppe Ummarino and Peter J. Russell outline a new modular cutter concept, which has been primarily developed for operations in platform decommissioning.
inshore. Diamond Wire Cutting Systems (DWCS), which produce self verifying cuts by the diamond wire physically passing through the target, ensuring that no inclusions are left to prevent lifting operations, are frequently utilized in platform decommissioning operations.
R
ecent years have seen the long discussed offshore decommissioning of platforms becoming a reality with size reduction being performed both offshore and
order to remove a platform, eg braces, risers, jacket legs, piles, pile guides, launch runners, etc, often leads to a requirement for a large range of different size cutters to be mobilised. To reduce this requirement a new range of modular cutters capable of handling all sizes from 60 (1524mm) to 120-in (3048mm) diameter has been developed. Apart from reducing the number of cutters required this also leads to a large reduction in deck space requirements and operational planning. The principal of the system is to utilise a common, and standard, in-feed system but to also allow the width of the cutter to vary by the insertion of buoyant spacers. This is especially useful for cuts across launch runners where the target is an irregular shape.
Baskets
In operations it is commonly required to move from horizontal to vertical cuts with various degrees of batter and angled cross bracing cuts in between. This would normally require separate deploymen/parking baskets for each size cutter and orientation. To simplify deployment a new range of baskets has been designed to allow vertical, horizontal and any degree of pitch or roll stowage of the cutter. All inside the one outer frame.
The basket is fitted with positive WRov locks and also an internal hydraulic lock to prevent movement of the cutter when passing through the splash zone. Additionally the option exists to be able to hang the basket on the structure if mid water cuts are required, for example if the jacket is being removed in two or more parts.
This saves considerable time compared to the basket being laid on the seabed with the WRov having to transit to and from the cut site.
Fig. 1. A 120-in OD Corner Leg Castellation Profile (Representative). The removal of large offshore structures, with its
inherent dependence on high cost heavy-lift vessels, has led to an in-depth appraisal of the facilities being included in sub-sea cutting spreads to meet today’s requirement of reducing the time that lift-vessels and work-class remotely operated vehicles (WRovs) are on station while simultaneously maintaining the self verification requirement of the cut line. To meet the challenges of Frigg, North West Hutton and Ekofisk removals the CUT group has developed a new range of features on its patented Diamond Wire Cutting System. The large range of section sizes that must be cut in
Cutting inside the jacket
To obtain initial separation of the major sections it is common for internal bracing to be removed at the split line. This previously meant flying the cutter inside the structure, with its surface umbilical attached.
The new generation of cutters can be flown into place and locked to the structure, without the power umbilical being attached, this and the emergency release are connected later.
This system gives easier WRov positioning without umbilical drag being present and also increased protection against entanglement and abrasion when flying to the site.
www.engineerlive.com ➠
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76