This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
SD = Sprocket-nose DG = Sprocket-nose with Guard Mate® holes ML = Narrow kerf sprocket-nose
SPROCKET NOSE PITCH
A
TOOTH COUNT 10
CHAIN TYPE
4 = .043" 0 = .050"
25
90 91
E 7 BAR MOUNT
A041 A061 A074 A095 A108 A218 A318 Z041 Z095
INTENZ® T041 T218
The bar for occasional woodcutters using electric or small gasoline-powered saws with 90-series Micro-Lite™, 91 Low Profile™ chains or 1/4"-pitch chain.
Double Guard® Features Slim symmetrical contour is light in weight, maneuverable, and reversible for long life.
Small-radius nose helps reduce kickback energies Models are available with the Intenz® tensioning mechanism built into the bar itself.
Bar mount holes to mount the PowerSharp® bar mount sharpener are available on some models.
MICRO-LITE™
Micro-Lite™ narrow-kerf cutting systems increase cutting efficiency and require less power from the saw than standard cutting systems.
INTENZ
PATENTS PENDING / BREVETS EN INSTANCE / PATENTES EN TRÁMITE
Intenz® tensioning mechanism built into the guide bar itself.
PowerSharp® the easy-to-use, precision sharpening system that gives chain saw users the power to sharpen their chain in a matter of seconds with a simple-to-use attachment. Bars with the PowerSharp® feature icon have the holes to accept the PowerSharp® bar mount sharpener.
Recommended Saw Sizes – Electric or gas up to 2.5 cu. in (41 cc)