This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
20-series chain is a low-kickback chain that meets the ANSI low-kickback standard without compromising performance or cutting speeds. It is the high performance choice for occasional users, arborists and commercial cutters.
Features Micro Chisel® cutters have small-radius working corners for excellent performance and ease of maintenance.
“X” grind – Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
Bar Lengths: 13 to 20 in. (32 – 50 cm) Saw Sizes:
38 to 62 cc GAUGE CUTTER SEQUENCE
20BPX 21BPX 22BPX
.050" .058" .063"
KICKBACK SAFETY ®
3
LubriLink™ tie straps help keep oil where it’s needed – on the chain.
LubriWell® oil holes help carry oil around the full length of the guide bar’s groove.
Vibe-Ban® chassis design reduces vibration 25% or more at the handles.
20LPX 21LPX 22LPX
The high-performance chain for professional woodcutters who use .325"-pitch saws.
Features “X” grind – Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
Top-performing square-corner “chisel” cutters. Bumper drive links help reduce kickback. The .325" version of our popular Super 70 chain.
Bar Lengths: 13 to 20 in. (32 – 50 cm) Saw Sizes:
38 to 62 cc AVAILABLE IN MULTI-CUT™ CHAIN VERSION PG. 112
LubriLink™ tie straps help keep oil where it’s needed – on the chain.
LubriWell® oil holes help carry oil around the full length of the guide bar’s groove.
Vibe-Ban® chassis design reduces vibration 25% or more at the handles.
Witness Mark™ Top-plate witness mark makes accurate sharpening easier.
Patented Steel® OREGON® OCS-01 steel is patented and provides greater durability.
Blued Cutters provide superior corrosion resistance.
FOR Saw Chain 105 GAUGE CUTTER SEQUENCE
20LPX 21LPX 22LPX
.050" .058" .063"
KICKBACK SAFETY
Witness Mark™ Top-plate witness mark makes accurate sharpening easier.
Patented Steel® OREGON® OCS-01 steel is patented and provides greater durability.
Blued Cutters provide superior corrosion resistance.