EXECUTIVE HIRE SHOW REVIEW continued
Makita
targets dust New from
Makita UK is an M-Class dust extraction vacuum unit, available in 110V and 240V
versions, for use when working with mica, china clay, gypsum, wood, masonry, GRP and concrete. The VC2201MX1/1 and VC2211MX1/2 models have a 1050W motor and a 22-litre stainless steel tank. An automatic self-cleaning filter system is incorporated, comprising a powder filter, damper and pre-filter, with a valve to re-direct airflow through each in turn to release the collected material into the container.
01908 211678
www.makitauk.com HGI unveils hybrids
New to the Harrington Generators International (HGI) line-up is the HRH range of six hybrid machines for silent operation, offering 16kVA to 30kVA of continuous power and 50kVA to 60kVA peak output. They have the same ‘rental specification’ canopies as are fitted to conventional units for low noise and protection against water ingress. The batteries can be charged via mains power or a generator and can be connected to solar panels and wind turbines. Also new are the SKD60i and SKD 100i diesel dual voltage generators offering 6kVA and 10kVA, and the petrol powered HRP24 and HRP28 models, with respective outputs of 3kVA and 3.5kVA and available as 110V or dual voltage versions.
01629 824284
www.HGI-generators.com
Fairport reveals new mixer
Fairport previewed a new tip-up mixer. Scheduled to become available in three months, the electric (110V or 240V) machine has a drum capacity of 130 litres. It has bolt-on paddles inside the drum for easy replacement and a four-point stand for stability. The machine has long side frames to protect against site damage and to act as handles, to allow tipping to be achieved with the operator’s hands at a more comfortable level.
0114 276 7921
www.fairport.uk.com Addex launches Big Ben
Designed to address an important Health & Safety issue, the Big Ben braked pulley from Addex is an alternative to traditional gin wheels. The product was judged to finish third in the Innovation Trail. It has a 50kg load capacity, and, if the operator lets go of the rope, the load is arrested and lowered to the ground at a rate of 1.5m per second. The descent is stopped if the rope is touched lightly. The product is designed for easy maintenance and to withstand harsh environments. It can be used with any 16mm to 18mm braided rope,
or 18mm twisted polypropylene rope, with a breaking strain of 1000kg. 01432 416000
www.addex-group.com
Camon stump grinder impresses
Tracmaster has launched the Camon SG30 stump grinder, which was displayed as a prototype to invite feedback at last year’s Show. It can deal with stumps that are protruding up to 56cm above ground and down to 33cm below. The machine is only 62cm wide to facilitate access to gardens with restricted access. “We have taken orders for the SG30 here at the Show. Hirers definitely see this exhibition as the best place to see the latest products available on the market, and to do business,” MD Alex Pitt told EHN.
01444 247689
www.camon.co.uk 40
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64