Technology
All about the articulation
On AC40s there is plenty going on aloft as well as more obviously in the water...
Bigger isn’t always faster. In the 2013 America’s Cup in San Francisco the speed and spectacle of 72ft wing- masted cats on foils turned heads like never before. But in the next Cup cycle in Bermuda the smaller AC50s weremore nimble and in some cases faster. And they were already more consistent performers. Back then, part of the focus was
on the solid wing sails. The current Cup boats have what appears to be a more conventional sailplan yet for the Southern Spars-built masts on the AC40s, this return is anything but straightforward. The rapid ascent up a staggeringly steep speed curve pushes the boundaries of design and build. It's also clear that new AC40 one-design monohulls are potent machines and punching above their weight. The limitations of foil cavitation
remain an obstacle to ever faster boats, but aero drag is also a huge factor. High apparent wind speeds mean drag that increases by the square. In this area alone the rig is a crucial factor. Add the twin-skinned mainsails and the new territory that designers find themselves in when it comes to rotating a mast while maintaining the precise shape of the main and jib and it ‘s easy to see why Southern Spars has been so busy. ‘The AC40 rigs are scaled down
versions of the AC75s’ masts but that’s not to say the development has been simple,’ says Southern Spars’ Jarrad Wallace. ‘For either boat it’s been the twin-skins that set these rotating masts apart from what we’ve seen before.’ There is nothing new in rotating
masts onmultihulls, but those boats have a wide chainplate base which
makes it easier to cater for rotation. On amonohull, the chainplate base ismuch narroweryou need spreaders tomaintain a decent shroud angle at themast. These spreaders articulate as themast rotates. ‘We’ve previously built a Vismara
65 and a few Imoca 60s that had a similar system, but it’s not a common configuration. We are starting to see a trickle down into modern high-performance boats like the Mills-designed Flying Nikka and others - in this case we have two sets of spreaders to maintain the shroud angle. It’s already clear that the system works and I’m sure there’s going to be more like them.’ To achieve the articulation, the
mast attachments are soft tangs for the forestay and each diagonal allowing the mast to rotate around the spreaders which use ball and socket attachments to the mast. In effect, the spreaders and rigging package remain in-plane while the mast rotates and to realise this, all rigging is by Future Fibres to create a fully integrated plug-n-play package for the teams. ‘One of the other interesting
aspects of this rig configuration is that backstays are no longer necessary,’ he continues. ‘These were originally included on the AC75s to support the masthead code zeros, which were part of the original sailplan, but once it was clear that the code zeros weren’t required there was no need for the backstays which were causing drag. Of course, as we now know, it wasn’t that simple to remove them in the last Cup as the rules required they were still to be fitted. But on the AC40 we certainly don’t need them.’
Top & above: the AC40s have rotating masts like multihulls but also need spreaders because of their narrow shroud base. Backstays are no longer necessary; instead, the cunningham is used to control sail shape and the masts are designed accordingly
Backstays are also no longer
required for their other usual role, to change the shape of the sails. Instead, the use of North Sails’ structured luff Helix sails has seen a shift to controlling sail shape with the cunningham instead. But here the loads have increased significantly, which in turn has influenced the design of the mast. ‘The AC75s cunningham loads
basically doubled during the last Cup which I wouldn’t be surprised if this continues to increase on the next generation.’ When it comes to the construction
of the AC40 masts, again they share a great deal of the techniques that were used in the AC75 spars. The D section mast is a carbon fibre shell with a shear web of cored sandwich structure. The aluminium luff tracks are bonded onto the spar while the cunningham tracks are also aluminium and all the tangs are designed for soft strop attachments. But while the AC75s, AC40s and
Flying Nikka projects are at the leading edge of monohull foiling development, some aspects are already being applied on more conventional grand prix offshore race yachts, where Southern Spars and their high profile clients are beginning to see some very compelling results.
www.southernspars.com
❑ SEAHORSE 57
EMIRATES TEAM NEW ZEALAND
UGO FONOLLA/AMERICA’S CUP
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121
