Products
A New Dimension for Sensor Technology The binder Innovation & Technology Center (ITZ) has developed a new direct printing technique that allows the application of functional electronic layers directly on a component.
As digitalization increases, so does the demand for new sensor technologies. Smart systems are revolutionizing the communication between applications and their users. First of all, a balance between more and more complex sensor networks with data processing and simpler, more user friendly operator support is necessary. The trend toward miniaturization makes it difficult to equip parts having only a limited amount of space with conventional sensors. The binder ITZ has, for this reason, developed a new direct printing technique – the binder method – that can overcome all these challenges. According to Dr. Stefan Ernst, one of the co-developers of the new printing technique, the advantages are obvious. “The printed electronics need less space. In addition, they are more flexible in application and more cost efficient.“
www.binder-connector.de
Partnering with Global Suppliers to Eradicate a Common Enemy Smiths Interconnect is proud to be collaborating with leading medical technology organizations around the world to combat the ongoing COVID-19 pandemic. We’ve long been a trusted partner to key ventilator manufacturers providing high reliability connectors renowned for their durability and unfaltering performance in critical environments.
Currently our teams in Asia, the Americas and Europe are supporting programs to deliver connectors for ventilator production and delivery within those regions. These are products we’ve provided for many years including among others:
KNB Series – a board-to-board connector with Hypertac® hyperboloid technology utilized within a French-made portable ventilator found in ambulances, ambulatory helicopters and hospitals.
www.smithsinterconnect.com
Key factors to consider when selecting cabinets for 19” mounted electronic equipment
Alan Cook, Sales Director of Foremost Electronics, the engineering-led Essex based importer and specialist distributor of electromechanical components, recommends designers and systems integrators take into account the following seven key considerations when considering the selection of a suitable cabinet; Selecting a suitable cabinet for any electronic system can be a challenge. Applications and environmental conditions are major influences on sourcing the correct product. Other than the large 19” datacomms and telecoms markets and clean room or laboratory use, cabinets may be required to withstand or protect the installed equipment from extreme heat, high dust or other contaminant environments, radio-frequency/electromagnetic interference (RFI/EMI) and locations subject to high shock and vibration. T: +44(0) 1371 811171 Ext:214 E:
emma@4most.co.uk W:
www.4most.co.uk
64 September/October 2020
www.electronicsworld.co.uk
IN-BOX Transparent-Lid Enclosures Now In PC – 16 Sizes OKW has further expanded its range of IN-BOX industrial electronic enclosures. The transparent-lid version is now available in polycarbonate (PC) for extra strength and flammability resistance. These popular and tough plastic enclosures for terminal installations suit a wide range of applications including digital and analogue instrumentation, sensors, interfaces, security systems, HVAC, machine building, construction equipment, Smart Factory and Industry 4.0.
IN-BOX offers high levels of impact resistance (IK07/08) and ingress protection (IP 66/67); the sealing gasket is pre-foamed in the top. Quarter-turn stainless steel lid screws speed up installation and maintenance.
The enclosures can be mounted on a wall, either directly or with brackets
(accessory) for external installations. Inside, there are screw pillars for DIN rails, PCBs and mounting plates.
Visit the OKW website for more information:
https://www.okw.co.uk/en/Plastic-enclosures/In-Box.htm
Reliable Secondary Protection for Battery Packs in High-Current Applications from ATC Semitec Safe operation is the top priority for Li-ion batteries. While conventional current fuses only offer protection against high current incidents, the SCHOTT SEFUSE® D6SE-45 Battery Logic Fuse provides additional protection against overcharging. These miniature surface mount battery logic fuses reliably cut off in case of overcurrent during discharge or overcharge. Excessive discharge currents will blow the fuse in a conventional manner. Available from ATC Semitec, these SEFUSE® Battery Logic Fuses enable improved Li-ion battery safety in applications requiring 45A currents, such as rechargeable battery packs for garden/
power tools, cordless, robotic household appliances, energy storage systems, e-bikes, and e-motorcycles.
For expert technical advice or samples please call our team at ATC Semitec Ltd on 01606 871680
sales@atcsemitec.co.uk www.atcsemitec.co.uk
Strong New Website for Components Bureau Components Bureau are excited to announce the launch of their brand-new website! Focused on our POWER offering, the new design features our own brand transformers and extensive power supply offering
The new site is equipped with strong filter options and datasheets for the power supply range providing the option of searching by brand, market sector, format type, no. of outputs and cooling methods. We believe this will allow the visitor to hone in on a selection of products from our brand portfolio to suit their application. We offer an unrivalled wide variety of leading-edge modular, configurable power supplies. Tel: +44 (0) 1480 412233 Web:
www.componentsbureau.com Email:
emma@componentsbureau.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
