FOOD & BEVERAGE
DETECTOR M
SUSTAINABLE NUT SUPPLIER SELECTS SUPERMARKET-SPEC CONVEYOR METAL
ost snack producers opt for gravity metal detectors. With 15 Fortress mini Vertex snack inspection systems integrated with multi-head weighers in its Aintree factory, Trigon Snacks is no exception. Yet, for its latest coated honey roast nut production line, the nut specialist selected a bespoke linear Stealth metal detector with an innovative retractable conveyor reject system. Processing 7,000 tons of nuts annually from its British Retail Consortium A-grade and RSPO certified facility, Trigon Snacks supplies a wide range of nuts and snacks to the licensed trade, retailers, and food service operators. Marketed under its own Big D and Bar Bite brands, as well as retailer’s own labels, for its new honey-roasted nuts line the company commissioned a highly sensitive horizontal metal detection concept.
Stringent retailer COPs specified that as ‘naked nuts’ the new honey-coated range must be inspected for metal contaminants prior to own- label packaging. Additionally, Trigon required a supermarket-spec metal detector that was sensitive enough to adapt to the fine oil and sugar tolerances. For logistical reasons, a small-footprint, wide-head Stealth metal detector engineered to inspect the fried, dried and seasoned nuts on a conveyor before entering the chute and falling into the one-ton sacks (over 1,000 kilograms), was the most viable and accessible option.
Screening 32 tons of honey-roasted nuts daily, space limitations were a key driver to the design, reaffirms Trigon’s lead engineer Mark Grieve. “Being located on a mezzanine floor, we commissioned a wide-head yet highly sensitive metal detector with a specially adapted linear conveyor system measuring just 40 cm wide.”
REJECT ON A ROLLET Using compatible collective parts, the inaugural Factoring in the conveying and reject system was critical to guarantee reliable operation and avoid false readings. Given the tight footprint, a customised solution was the best way to ensure that metal detector performance was not compromised. The low profile nuts combined with the inspection speed meant that a kicker would be incompatible. It is also virtually impossible to isolate and divert contaminated products with naked products. With insufficient space to accommodate a flap style reject, Fortress instead engineered a clever and efficient retracting band conveyor and reject mechanism. Rather than a typical tongue and groove conveyor, the rollers on Trigon’s moveable, easy- clean, food-grade belt are rounded. The metal detector which sits at the front of the conveyor calculates precisely how long the contaminated nuts will take to reach the end of the conveyor band, communicating via the metal detector control system. The belt then smoothly retracts back on a sliding rail rolling the rejected nuts into the dedicated bin located beneath the conveyor, resuming its inspection position in just seconds. To date, Trigon reports zero false rejects on the honey-roasted nut line, upholding the company’s long standing sustainable, ethical and traceable principles. Despite admitting he was slightly apprehensive by the compact dimensions of the entire system, Mark corroborates that it has already proved itself to be a reliable and easy to use machine.
Hourly manual tests are the only reported source of daily waste. The lead engineer estimates this to be less than 0.05 per cent of the total production, well below the food manufacturing average which
on some lines can reach double figures. From a sensitivity perspective, Fortress Sales Manager Jaison Anand validates that the metal detector is smashing expectations. Capable of detecting ferrous and non-ferrous particles as small as 1.0 mm and stainless steel particles down to 1.5 mm, Jaison attributes this level of sensitivity to the aperture dimensions. He explains: “Aperture size is critical to optimal operation. If aligned to the size of the product being inspected it delivers the best performance. That is why we installed a wide yet low profile metal detector head on the Trigon honey nut line.”
A longstanding advocate of Fortress equipment, Trigon Snacks, which last year celebrated its half- century milestone, was in fact one of the food safety specialist’s first UK snack customers. Managing Director Phil Brown, a sales manager at the time, recollects the moment Trigon became the springboard for the development of Fortress Technology’s mini Vertex metal detector that is now adopted widely by snack manufacturers across the globe. “I had showcased a standard-sized gravity metal detector, but they needed something much more compact, with ultra-slim case dimensions to slot between the volumetric filler and bagging machine. We created something very bespoke, taking a ‘try it and see if you like it’ approach. As we fully anticipated, they did!”
Several decades on and 15 of these very Vertex metal detectors continue to comply with HACCP regulations, detecting the tiniest metal particles and protecting the Trigon own-label and retailer brands.
Trigon Snacks
http://www.trigon-snacks.com/
10 APRIL 2022 | FACTORY&HANDLINGSOLUTIONS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62
