Product News SAV SYSTEMS
SAV and Insite Energy have joined to launch Kurve, a digital smart metering app for heat networks. Kurve could deliver 62% savings in capital expenditure and 53% savings in operational costs.
Analysis of this data provides insight into usage patterns and enables heat network operators to optimise network performance. Kurve shows users their energy
consumption for the day, week, month and
year, giving them access to this data whenever they want. This visibility promotes their engagement with the system and their energy usage.
meter, prepayment valve and Kamstrup Master, with a heat interface unit (HIU) from SAV or another provider. The equipment is pre-wired and does not require an in-home display (IHD) device and its design reduces service, maintenance and administration costs.
www.sav-systems.com
HOVAL
Hoval’s UltraGas (1550) is a 1550kW boiler that features a small footprint for its output of just 3.3m2. It is only 1550mm width, 2152mm depth and 2547mm height.
UltraGas (1550) combines high efficiency with low emissions at all outputs thanks to its innovative aluFer heat exchanger design and modulating premix burner. NOx emissions, for instance are just 31 mg/kWh.
The premix burner generates the optimum
fuel/air mixture which can be adjusted to meet varying heat loads. As a result, UltraGas (1550) delivers a modulation range from 328kW to 1550kW. In preventing start/stop operation, it reduces fuel consumption and emissions as well as electricity consumption.
rates and return temperatures and is controlled via Hoval’s intelligent TopTronic system.
www.hoval.co.uk
Product News
ZEHNDER GROUP
Zehnder Group UK’s Zehnder Lateo is a natural convector heat emitter tailored to care environments. The heat emitter of the Lateo is positioned behind the casing which helps deliver a lower touch temperature, ideal for environments where safety is crucial.
Zehnder Lateo prevents the room cooling down and mirrors the outdoor natural thermal lift effect, allowing the Lateo to provide efficient heating technology.
Lateo’s interplay between cold air and rising hot air and produces a thermal wall that prevents the room cooling down and counteracts any unwanted cold draughts and creates a natural warmth.
The product is versatile to use as it has a closed design due to compact construction, a short response time to heat a room rapidly, high thermal output, invisible integrated connections and mounting brackets for easy installation.
www.zehnder.co.uk
MITSUBISHI ELECTRIC
Mitsubishi Electric’S M Series range of air conditioning units from has grown with the introduction of its new MFZ-KT range of R32 floor mounted systems.
The MFZ-KT range comes with three shaped vanes for optimum air distribution and an auto swing vane function provides more natural and comfortable airflow
throughout the room. With a built in seven-day timeclock users can also control their system more effectively, helping to increase energy saving. The new range is available in 2.5kW, 3.5kW and 5.0kW capacities and its lightweight and compact design makes installation easy.
Connection to R32 MXZ multi-split outdoor units is also possible where multiple indoor units are required.
www.les.mitsubishielectric.co.uk
HYGROMATIK
DDS from HygroMatik is an energy efficient air humidification option for industrial settings. DDS can be connected to pressurised steam networks to allow the steam to be used for humidification. By using pre-existing networks, DDS
helps humidify the air using existing steam, minimising energy consumption.
DDS comes in two versions. Usually DDS variant C will meet the requirements for integration into an overall system.
The HygroMatik pressure steam system DDS is equipped with steam lance heating piping
lances and strainers are made from high-quality stainless steel and the strainer is easily replaceable.
The DDS is designed for simple installation in any existing pressurised steam network.
www.hygromatik.com
www.heatingandventilating.net piping which keeps condensate to a minimum. The steam
SWEGON
Swegon has two new modular versions of its popular GOLD air handling unit (AHU). The GOLD TOP and GOLD L-Concept
address the issue of the shortage of space made available for building services plant. The GOLD TOP and L-Concept have been designed to allow specifiers and installers to customise the AHU in a way that gives them greater installation flexibility.
The modular design means it is easy to combine the units to suit the space available.
The ductwork connections on the TOP units are on the top of the unit and the L-Concept AHUs take the air through the unit at a right angle.
These designs are part of Swegon’s drive to simplify project delivery and help create improved indoor climates.
www.swegon.com December 2019 35
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40
